Will macros take more than two digits? I am starting to play around with them (and admittedly not a ton of experience), but I can't get the following to work for whatever reason: [2376] macro = macro [functions] ; Macro Commands 423 = macro,1 4231 = macro,2 [macro] ; connect to NETDA Hub 28741 1 = *328741# 2 = *128741# Does this look right and should it work? I did restart Asterisk/did an rpt reload etc, but no change. If I dial (or send from the CLI) *423, I expect it to connect to my hub nobe, *4231 to disconnect, but it does not work. 73 Stephen K1LNX
No, it wont, because once it reads 423 it can execute it, and so it does and stops reading in digits. So, it will never reach 4231. What would work is if you changed 423 to 4230 or 4232. N5ZUA On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
Will macros take more than two digits? I am starting to play around with them (and admittedly not a ton of experience), but I can't get the following to work for whatever reason:
[2376] macro = macro
[functions] ; Macro Commands 423 = macro,1 4231 = macro,2
[macro] ; connect to NETDA Hub 28741 1 = *328741# 2 = *128741#
Does this look right and should it work? I did restart Asterisk/did an rpt reload etc, but no change. If I dial (or send from the CLI) *423, I expect it to connect to my hub nobe, *4231 to disconnect, but it does not work.
73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Ahh.... ok... that makes sense now, wasn't so obvious to me lol... I'll give it a shot... thanks! On Tue, Jul 26, 2016 at 4:37 PM, Steve Agee <n5zua@earthlink.net> wrote:
No, it wont, because once it reads 423 it can execute it, and so it does and stops reading in digits. So, it will never reach 4231. What would work is if you changed 423 to 4230 or 4232.
N5ZUA
On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
Will macros take more than two digits? I am starting to play around with them (and admittedly not a ton of experience), but I can't get the following to work for whatever reason:
[2376] macro = macro
[functions] ; Macro Commands 423 = macro,1 4231 = macro,2
[macro] ; connect to NETDA Hub 28741 1 = *328741# 2 = *128741#
Does this look right and should it work? I did restart Asterisk/did an rpt reload etc, but no change. If I dial (or send from the CLI) *423, I expect it to connect to my hub nobe, *4231 to disconnect, but it does not work.
73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Still no joy on this... changed 423 to 4230 and did not work. Am I misunderstanding how this is supposed to work perhaps? Stephen K1LNX On Tuesday, July 26, 2016, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Ahh.... ok... that makes sense now, wasn't so obvious to me lol... I'll give it a shot... thanks!
On Tue, Jul 26, 2016 at 4:37 PM, Steve Agee <n5zua@earthlink.net <javascript:_e(%7B%7D,'cvml','n5zua@earthlink.net');>> wrote:
No, it wont, because once it reads 423 it can execute it, and so it does and stops reading in digits. So, it will never reach 4231. What would work is if you changed 423 to 4230 or 4232.
N5ZUA
On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
Will macros take more than two digits? I am starting to play around with them (and admittedly not a ton of experience), but I can't get the following to work for whatever reason:
[2376] macro = macro
[functions] ; Macro Commands 423 = macro,1 4231 = macro,2
[macro] ; connect to NETDA Hub 28741 1 = *328741# 2 = *128741#
Does this look right and should it work? I did restart Asterisk/did an rpt reload etc, but no change. If I dial (or send from the CLI) *423, I expect it to connect to my hub nobe, *4231 to disconnect, but it does not work.
73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Stephen, here is an example from one of my nodes. I believe the default prefix number is *5 for macros. [macro28183] ;Macro number = command string (ea command separated by space) -end with HASH ;1=*81 *80# ; play time and voice ID *51 1 = *327630# ; KI4SWB CONNECT CODE *51 2 = *342590# ; KB4JKL CONNECT CODE *52 3 = *341170# ; K5TRA HUB CONNECT CODE *53 4 = *141170# ; K5TRA HUB DISCONNECT CODE *54 6 = *327339# ; WB2JPQ Interlink System connect *56 7 = *33088953# ; AB2M Conference ECHOLINK *57 8 = *33045717# ; K2SPD-R *58 9 = *33001224# ; W2YMM-R ECHOLINK *59 50=*616319601051# ;Call W2YMM Cellphone *550 51=*616316611771# ;Call W2YMM home phone *551 552 = *76# ; DISCONNECT ALL CONNECTED LINKS *5552 553= *920# ; PLAY NET CONNECTING MESSAGE *5553 [macro1999] 7 = *33088953# ; AB2M Conference ECHOLINK *57 8 = *33045717# ; K2SPD-R *58 Robert Prybyzerski Jr W2YMM 631-960-1051 http://www.w2ymm.com On Tue, Jul 26, 2016 at 4:58 PM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Still no joy on this... changed 423 to 4230 and did not work.
Am I misunderstanding how this is supposed to work perhaps?
Stephen K1LNX
On Tuesday, July 26, 2016, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Ahh.... ok... that makes sense now, wasn't so obvious to me lol... I'll give it a shot... thanks!
On Tue, Jul 26, 2016 at 4:37 PM, Steve Agee <n5zua@earthlink.net> wrote:
No, it wont, because once it reads 423 it can execute it, and so it does and stops reading in digits. So, it will never reach 4231. What would work is if you changed 423 to 4230 or 4232.
N5ZUA
On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
Will macros take more than two digits? I am starting to play around with them (and admittedly not a ton of experience), but I can't get the following to work for whatever reason:
[2376] macro = macro
[functions] ; Macro Commands 423 = macro,1 4231 = macro,2
[macro] ; connect to NETDA Hub 28741 1 = *328741# 2 = *128741#
Does this look right and should it work? I did restart Asterisk/did an rpt reload etc, but no change. If I dial (or send from the CLI) *423, I expect it to connect to my hub nobe, *4231 to disconnect, but it does not work.
73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
In the functions stanza you define the lead in digit. (423 in this case). In the macro stanza the trailing digits (1 in this case) for each individual macro. Executing macro 1 would be *4231. Exccuting macro 2 would be *4232. Your line : 4231 = macro,2 Should be removed. If your dial plan allows, I would use a single digit lead in (4). Then three digit trailing digits (i.e. 200-299). So something like this: [functions] ; Macro Commands 4 = macro,1 ; Call a macro [macro] ; connect to NETDA Hub 28741 231 = *328741# ; Connect 232 = *128741# ; Disconnect Robert A. Poff Loganville, Pa -------- Original Message -------- From: Stephen - K1LNX <k1lnx@k1lnx.net> Sent: Tue Jul 26 16:58:29 EDT 2016 To: app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Macro handling Still no joy on this... changed 423 to 4230 and did not work. Am I misunderstanding how this is supposed to work perhaps? Stephen K1LNX On Tuesday, July 26, 2016, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Ahh.... ok... that makes sense now, wasn't so obvious to me lol... I'll give it a shot... thanks!
On Tue, Jul 26, 2016 at 4:37 PM, Steve Agee <n5zua@earthlink.net <javascript:_e(%7B%7D,'cvml','n5zua@earthlink.net');>> wrote:
No, it wont, because once it reads 423 it can execute it, and so it does and stops reading in digits. So, it will never reach 4231. What would work is if you changed 423 to 4230 or 4232.
N5ZUA
On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
Will macros take more than two digits? I am starting to play around with them (and admittedly not a ton of experience), but I can't get the following to work for whatever reason:
[2376] macro = macro
[functions] ; Macro Commands 423 = macro,1 4231 = macro,2
[macro] ; connect to NETDA Hub 28741 1 = *328741# 2 = *128741#
Does this look right and should it work? I did restart Asterisk/did an rpt reload etc, but no change. If I dial (or send from the CLI) *423, I expect it to connect to my hub nobe, *4231 to disconnect, but it does not work.
73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------------------------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bob Poff -
Stephen - K1LNX -
Steve Agee -
W2YMM