Here is a snip from rpt.conf [41902] ; Change this to your assigned node number rxchannel=Zap/pseudo erxgain=-3 etxgain=3 eannmode=2 ;controlstates=controlstates scheduler=schedule41902 -----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 10:23 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting Hmm. Shouldn't matter. Where in the file did you put the statement? It should be in the section where you're defining your node. -- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey WR4JW
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 9:27 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Dumb question: Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hello Team, I'm running RPi2 and I can seem to get Echolink to work. Does anyone have it running on RPi2?? Thanks, David KE6UPI On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo erxgain=-3 etxgain=3 eannmode=2 ;controlstates=controlstates scheduler=schedule41902
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 10:23 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn't matter. Where in the file did you put the statement? It should be in the section where you're defining your node.
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey WR4JW
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 9:27 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Dumb question: Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Do you have the echolink.conf setup? http://ohnosec.org/drupal/node/56 On Thu, Nov 26, 2015 at 12:47 AM, David KE6UPI <dshaw@ke6upi.com> wrote:
Hello Team, I'm running RPi2 and I can seem to get Echolink to work. Does anyone have it running on RPi2??
Thanks, David KE6UPI
On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo erxgain=-3 etxgain=3 eannmode=2 ;controlstates=controlstates scheduler=schedule41902
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 10:23 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn't matter. Where in the file did you put the statement? It should be in the section where you're defining your node.
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey WR4JW
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 9:27 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Dumb question: Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks Team,, Jim you hit the nail on the head... David On Wed, Nov 25, 2015 at 10:55 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Do you have the echolink.conf setup?
http://ohnosec.org/drupal/node/56
On Thu, Nov 26, 2015 at 12:47 AM, David KE6UPI <dshaw@ke6upi.com> wrote:
Hello Team, I'm running RPi2 and I can seem to get Echolink to work. Does anyone have it running on RPi2??
Thanks, David KE6UPI
On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Here is a snip from rpt.conf
[41902] ; Change this to your assigned node number
rxchannel=Zap/pseudo erxgain=-3 etxgain=3 eannmode=2 ;controlstates=controlstates scheduler=schedule41902
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 10:23 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Hmm. Shouldn't matter. Where in the file did you put the statement? It should be in the section where you're defining your node.
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Yes, I did restart Asterisk. BTW, my system is running ACID.
Jamey WR4JW
-----Original Message----- From: Buddy Brannan [mailto:buddy@brannan.name] Sent: Tuesday, November 24, 2015 9:27 PM To: Jamey Wright <jamey.wright@charter.net> Subject: Re: [App_rpt-users] Echolink Setting
Dumb question: Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?
-- Buddy Brannan, KB5ELV - Erie, PA Phone: 814-860-3194 Mobile: 814-431-0962 Email: buddy@brannan.name
On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright@charter.net> wrote:
Does the command “eannmode = x” only work in newer distributions such as DIAL? I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
Thanks
Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
David KE6UPI -
Jamey Wright -
Michael Hebert