EchoLink Callsign instead of node number.
Is there a way to change Allstar to report an EchoLinks Callsign and not their node number when they connect? I have not been able to find any documentation how to change this. -- boB - W5EVH
in the rpt.conf file.... eannmode=2 ; Default: 1 = Say only node number on EchoLink connects ; 2 = say phonetic call sign only on EchoLink connects ; 3 = say phonetic call sign and node number on EchoLink connects Corey N3FE ________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Bob Roszkowski [bob@w5evh.org] Sent: Monday, October 24, 2011 1:57 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] EchoLink Callsign instead of node number. Is there a way to change Allstar to report an EchoLinks Callsign and not their node number when they connect? I have not been able to find any documentation how to change this. -- boB - W5EVH -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=C9829256C.A187B>
eannmode=2 in the node stanza see http://ohnosec.org/drupal/node/107 73 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bob Roszkowski Sent: Monday, October 24, 2011 1:57 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] EchoLink Callsign instead of node number. Is there a way to change Allstar to report an EchoLinks Callsign and not their node number when they connect? I have not been able to find any documentation how to change this. -- boB - W5EVH
Ken, thanx for the info. I think I have something else messed up. When I change that parameter and an EchoLink station calls, I just get "Connected to <my node number>" It seems as if the audio files are missing or something. Are there any other parameters that I need to be aware of? boB On Mon, Oct 24, 2011 at 9:11 AM, Ken <ke2n@cs.com> wrote:
eannmode=2 ****
** **
in the node stanza****
** **
see****
** **
http://ohnosec.org/drupal/node/107****
** **
** **
73****
Ken****
** **
** **
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Bob Roszkowski
*Sent:* Monday, October 24, 2011 1:57 AM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] EchoLink Callsign instead of node number.****
** **
Is there a way to change Allstar to report an EchoLinks Callsign and not their node number when they connect? I have not been able to find any documentation how to change this.
-- boB - W5EVH****
-- boB - W5EVH (956) 286-5150 LaredoHams Amateur Radio Club President www.LaredoHams.com ARRL Life Member www.ARRL.org Texas VHF FM Society Life Member Skywarn Coordinator for Webb County RACES DRO 83
Well - on mine, it announces " connected to Kilo Echo Two November connected to (my_node) I believe the phonetic letter pronunciations come from /var/lib/asterisk/sounds/phonetic Which is part of the standard install. Make sure the "eannmode" instruction is in the right part of your config file and you do not have an unwanted semi-colon somewhere. 73 Ken From: Bob Roszkowski [mailto:bob@w5evh.org] Sent: Monday, October 24, 2011 5:02 PM To: Ken Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] EchoLink Callsign instead of node number. Ken, thanx for the info. I think I have something else messed up. When I change that parameter and an EchoLink station calls, I just get "Connected to <my node number>" It seems as if the audio files are missing or something. Are there any other parameters that I need to be aware of? boB
participants (3)
-
Bob Roszkowski -
Corey Dean -
Ken