Node connection issue : I have an issue connecting 2 private nodes all together... I previously did this with 10 nodes with great success and working for months perfectly. The way I proceeded is fresh instals and I used the very same password at the installation time on all the machines , same for iaxrpt access same for machine access, basic setup with a usb fob and a repeater connected , I enter the nodes in rpt.conf , I comment the correct file for no registration on allstarlink, since those machines are part of a private network, etc. In fact all is correct ! the only difference now is that I want to connect a node that has been built the same , but the password given at the end of the installation different than mine. I checked everything and went to conclusion that this probably the offending action... This situation is on a local net , in the lab , and also is the same if the nodes are on internet. May someone help me ? It will be very appreciated, since this happens in the lab while I am teaching 16 students to configure a small network of Xelatec radio servers I was to forget to tell that we use the ISO downloaded from xelatec site with the current version and this is a non profit task I do to promote Ham radio to my students in Radio-Communications course. Best regards, Serge Berube ve2abc