I just enabled a private node on my CentOS install. The main public node #41477 is currently bound to the echolink channel driver. How do I also concurrently bind it to the other private node #1477 as well as 41477? The entry in the echolink.conf file is: astnode=41477 can one do astnode=41477,1477 ;or some such kludge? Any Help appreciated. -KM6HK
As Jim would say "WHY" then no.. You would have to connect to the node with EchoLink running. Then pass the connect codes to that server.. I think its *4.. But I haven't done that in alone time. David KE6UPI On Mon, Jan 23, 2017 at 11:30 AM, KM6HK <km6hk@icloud.com> wrote:
I just enabled a private node on my CentOS install. The main public node #41477 is currently bound to the echolink channel driver. How do I also concurrently bind it to the other private node #1477 as well as 41477?
The entry in the echolink.conf file is: astnode=41477
can one do astnode=41477,1477 ;or some such kludge?
Any Help appreciated.
-KM6HK _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I probably did not state my question clearly enough. The channel driver appears to be only able to bind ONE discrete echolink node number to ONE discrete Allstar node number using the line isn the conf file: node=12345(this is some echolink node number that your have registered in the global echolink system) astnode= 98765(this is some public allstar node) astnode=4321(this is some private allstar node running on the same system) but then second “astnode” above may not be a correct syntax ??? -KM6HK
On Jan 23, 2017, at 2:07 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
As Jim would say "WHY" then no.. You would have to connect to the node with EchoLink running. Then pass the connect codes to that server.. I think its *4.. But I haven't done that in alone time.
David KE6UPI
On Mon, Jan 23, 2017 at 11:30 AM, KM6HK <km6hk@icloud.com <mailto:km6hk@icloud.com>> wrote: I just enabled a private node on my CentOS install. The main public node #41477 is currently bound to the echolink channel driver. How do I also concurrently bind it to the other private node #1477 as well as 41477?
The entry in the echolink.conf file is: astnode=41477
can one do astnode=41477,1477 ;or some such kludge?
Any Help appreciated.
-KM6HK _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
you are correct. the driber will only bind to one node. so just bind it to your private node and then connect your public node to it either by command or schedule or permanetly. Thanks 73 Neil Sablatzky K8IT Allstar Node 41838 KITLINK Allstar Node 42087 KITLINK HUB IRLP Node exp0068 Echolink K8IT-L WIRES-X K8IT 11479 Room 21479 From: KM6HK Sent: Monday, January 23, 2017 7:07 PM To: David KE6UPI Cc: app rpt users Subject: Re: [App_rpt-users] Bind echolink channel driver to 2 nodes? I probably did not state my question clearly enough. The channel driver appears to be only able to bind ONE discrete echolink node number to ONE discrete Allstar node number using the line isn the conf file: node=12345(this is some echolink node number that your have registered in the global echolink system) astnode= 98765(this is some public allstar node) astnode=4321(this is some private allstar node running on the same system) but then second “astnode” above may not be a correct syntax ??? -KM6HK On Jan 23, 2017, at 2:07 PM, David KE6UPI <dshaw@ke6upi.com> wrote: As Jim would say "WHY" then no.. You would have to connect to the node with EchoLink running. Then pass the connect codes to that server.. I think its *4.. But I haven't done that in alone time. David KE6UPI On Mon, Jan 23, 2017 at 11:30 AM, KM6HK <km6hk@icloud.com> wrote: I just enabled a private node on my CentOS install. The main public node #41477 is currently bound to the echolink channel driver. How do I also concurrently bind it to the other private node #1477 as well as 41477? The entry in the echolink.conf file is: astnode=41477 can one do astnode=41477,1477 ;or some such kludge? Any Help appreciated. -KM6HK _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------------------------------------------------------------------------- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7998 / Virus Database: 4749/13818 - Release Date: 01/23/17
participants (3)
-
David KE6UPI -
KM6HK -
Neil k8it