OK, I followed the instructions and all seems to be working OK except a couple of strange things.... I have 2 nodes on my system at Dundry and on the second node I have lost control of the Courtesy tones. No matter what I do in RPT.conf, in the node stanza specified for telemetry for the GB3ZB repeater, it has no effect on the CTs that play. The first node is behaving normally. In my rpt.conf I have two telemetry stanzas, one for each repeater and they have different names within rpt.conf and are referenced in the definition for the separate repeaters. Is anyone else seeing this or have I broken something? One other question, I am now running the new "TX PL on input" feature - if I transmit thru my node using Iaxrpt, will that cause CTCSS encode too? ( It doesnt appear to and I was expecting it to? ) Thanks, Matt G4RKY On 7 May 2010 18:31, Jim Duuuude <telesistant@hotmail.com> wrote:

to get the absolutely latest, you need to do an svn checkout of the source tree and build it from that.

JIM WB6NIL

------------------------------ Date: Fri, 7 May 2010 18:22:30 +0100 From: matt.g4rky@googlemail.com To: App_rpt-users@qrvc.com Subject: [App_rpt-users] Updating Asterisk

Hi all,

Do I need to completely rebuild the system from CD created from a newly downloaded ISO to update my node to the latest build?

Or, can I do it from the comfort of my desk by using the method given on the developer section of the QRVC website?

I tried to update the app_rpt app, which worked fine but I wanted to use the new "CTCSS encode only when RX mute open" feature. This didnt work for me so I figured I needed to update chan_usb as well but there are some errors that get reported when I try and make it.

Thanks,

Matt