Has anyone been successful in adding a DMK URI to a MSS5000 repeater? I currently have a Arcom RC-210 controller that I'd like to remove and use just the URI interface. When I try running the radio tune menu, #2 receiver audio fails. My thought is the level is to low, but I'm not sure how to get it any higher, or possible use a different point that has a higher audio level. thanks, Bob / KC0EFC Node 27823
Do you have rxboost=1 in usbradio.conf? If so hopefully someone who is using a MSF can help you with finding a higher level audio. Another option would be to switch to simpleusb and let the radio do COR and PL decode. Actually I prefer this as Motorola does a better job of PL decode. -- Tim :wq On Jul 23, 2012, at 6:56 AM, Bob wrote:
Has anyone been successful in adding a DMK URI to a MSS5000 repeater? I currently have a Arcom RC-210 controller that I'd like to remove and use just the URI interface.
When I try running the radio tune menu, #2 receiver audio fails. My thought is the level is to low, but I'm not sure how to get it any higher, or possible use a different point that has a higher audio level.
thanks,
Bob / KC0EFC Node 27823
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Also don't forget the URI has a general use 6 db audio amp onboard. Robert Poff Loganville, Pa Droid X Mobile Tim Sawyer <tim.sawyer@me.com> wrote: Do you have rxboost=1 in usbradio.conf? If so hopefully someone who is using a MSF can help you with finding a higher level audio. Another option would be to switch to simpleusb and let the radio do COR and PL decode. Actually I prefer this as Motorola does a better job of PL decode. -- Tim :wq On Jul 23, 2012, at 6:56 AM, Bob wrote: Has anyone been successful in adding a DMK URI to a MSS5000 repeater? I currently have a Arcom RC-210 controller that I'd like to remove and use just the URI interface. When I try running the radio tune menu, #2 receiver audio fails. My thought is the level is to low, but I'm not sure how to get it any higher, or possible use a different point that has a higher audio level. thanks, Bob / KC0EFC Node 27823 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Bob, Sounds like DC is on the audio line. Place a .1uf cap in series Chuck K0XM On Mon, Jul 23, 2012 at 9:08 AM, Tim Sawyer <tim.sawyer@me.com> wrote:
Do you have rxboost=1 in usbradio.conf? If so hopefully someone who is using a MSF can help you with finding a higher level audio.
Another option would be to switch to simpleusb and let the radio do COR and PL decode. Actually I prefer this as Motorola does a better job of PL decode. -- Tim :wq
On Jul 23, 2012, at 6:56 AM, Bob wrote:
Has anyone been successful in adding a DMK URI to a MSS5000 repeater? I currently have a Arcom RC-210 controller that I'd like to remove and use just the URI interface.
When I try running the radio tune menu, #2 receiver audio fails. My thought is the level is to low, but I'm not sure how to get it any higher, or possible use a different point that has a higher audio level.
thanks,
Bob / KC0EFC Node 27823
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (4)
-
Bob -
Chuck Kraly -
Robert A. Poff -
Tim Sawyer