Hello I just realized that the speed test script i use has been changed up a little bit I figured I would post the new information on how to test your speed test via command line.. Here is where i posted the article I hope this helps ya all out! http://forum.voipham.com/index.php/topic,42.0.html Hello recently their has been some changes to a program i use to test out speed test related issues I decided to post the new information and code here to help others.. First off I create a script: Code: [Select] nano speedtestsetup.sh Inside speedtestsetup.sh I put the following information: Code: [Select] #!/bin/bash wget https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py --no-check-certificate chmod a+rx speedtest.py mv speedtest.py /usr/local/bin/ chown root:root /usr/local/bin/speedtest.py /usr/local/bin/speedtest.py To run the speed test I create another script called speedtest.sh Example Code: [Select] nano speedtest.shInside that script is the following information. Code: [Select] /usr/local/bin/speedtest.py I hope this helps out some one else like it has helped me.. Good luck and remember speed test is not everything you really should do a MTR report to different points around the country to look for packet loss and other issues that can occur.. Loren Tedford (KC9ZHV) Phone: Fax: Email: lorentedford@gmail.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> http://voipham.com