Jamey, You need to follow a certain procedure to add a second node. Here is a link to a howto. It is written for the BBB or RPi2 but is not specific to those platforms. You will need to physically remove the second node and the link to it in rpt.conf then follow the procedure. http://www.crompton.com/hamradio/BeagleBoneBlackAllstar/config-setup.pdf Go to page 10 of this document for the procedure. 73 Doug WA3DSP http://www.crompton.com/hamradio From: Jamey.Wright@morgan911.org To: app_rpt-users@ohnosec.org Date: Sun, 26 Jul 2015 04:49:45 +0000 Subject: [App_rpt-users] SimpleUSB_Tune I have added a second node to my server and have everything just about done but ran into something I didn't have an answer for. In simpleusb_tune27981.conf I have the following: [usb27981] ; name=usb27981 ; devicenum=0 devstr=1-1 In simpleusb_tune41903.conf I have the following: [usb41903] ; name=usb41903 ; devicenum=0 devstr=1-1 When I show the USB devices I get: [root@JWAllstar ~]# lsusb Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 001 Device 002: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter Bus 001 Device 003: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter In simpleusb_tune41903... shouldn't the devstr=1-1 be different? If so, how do I figure out what it should be? Thanks Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.