Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service". Per Part 97 : Sec. 97.201 Auxiliary station ------------------------------ (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held. (b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments. So 2 meters and above now. 73, Duane KA1LM
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear.. We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: DuaneVT . Sent: Tuesday, April 24, 2018 11:46 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs Radio Control was referenced as "Auxiliary Service". Per Part 97 : Sec. 97.201 Auxiliary station (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held. (b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments. So 2 meters and above now. 73, Duane KA1LM
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard? On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *DuaneVT . <mailto:selkie2@comcast.net> *Sent: *Tuesday, April 24, 2018 11:46 AM *To: *app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service".
Per *Part 97 : **Sec. 97.201 Auxiliary station*
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Steve Zingman Sent: Tuesday, April 24, 2018 12:14 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs I'm a little confused, Did Asterisk fail or memory and possibly a motherboard? On 4/24/2018 12:50 PM, Loren Tedford wrote: Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear.. We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: DuaneVT . Sent: Tuesday, April 24, 2018 11:46 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs Radio Control was referenced as "Auxiliary Service". Per Part 97 : Sec. 97.201 Auxiliary station (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held. (b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments. So 2 meters and above now. 73, Duane KA1LM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router. A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Steve Zingman <szingman@msgstor.com> *Sent: *Tuesday, April 24, 2018 12:14 PM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *DuaneVT . <selkie2@comcast.net> *Sent: *Tuesday, April 24, 2018 11:46 AM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service".
Per *Part 97 : **Sec. 97.201 Auxiliary station*
[image: cid:image001.png@01D3DBC2.81D4ED70]
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Hey Pierre by chance did you get to read the entire thread on this? Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Pierre Martel Sent: Tuesday, April 24, 2018 2:08 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router. A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>: The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Steve Zingman Sent: Tuesday, April 24, 2018 12:14 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs I'm a little confused, Did Asterisk fail or memory and possibly a motherboard? On 4/24/2018 12:50 PM, Loren Tedford wrote: Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear.. We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: DuaneVT . Sent: Tuesday, April 24, 2018 11:46 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs Radio Control was referenced as "Auxiliary Service". Per Part 97 : Sec. 97.201 Auxiliary station (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held. (b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments. So 2 meters and above now. 73, Duane KA1LM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
yup I did, Is my post so far off subject for you to ask that question. I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup.. 2018-04-24 15:10 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Hey Pierre by chance did you get to read the entire thread on this?
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Pierre Martel <petem001@gmail.com> *Sent: *Tuesday, April 24, 2018 2:08 PM *To: *Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router.
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state.
2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Steve Zingman <szingman@msgstor.com> *Sent: *Tuesday, April 24, 2018 12:14 PM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *DuaneVT . <selkie2@comcast.net> *Sent: *Tuesday, April 24, 2018 11:46 AM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service".
Per *Part 97 : **Sec. 97.201 Auxiliary station*
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Sorry Pierre for being short winded.. Let me get back to you Tuesday.. Right at the moment Medical issues and relaxation needs to be my priority up until Surgery on Monday.. But yeah I don’t like pi’s that much but in hind site I understand where your coming from.. I don’t like hardware tot either.. But not sure If I am willing to take the chance on software again.. Anyway I will catch every one when I can get back to concentrating on this topic later on.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Pierre Martel Sent: Tuesday, April 24, 2018 2:18 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs yup I did, Is my post so far off subject for you to ask that question. I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup.. 2018-04-24 15:10 GMT-04:00 Loren Tedford <loren@lorentedford.com>: Hey Pierre by chance did you get to read the entire thread on this? Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Pierre Martel Sent: Tuesday, April 24, 2018 2:08 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router. A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>: The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Steve Zingman Sent: Tuesday, April 24, 2018 12:14 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs I'm a little confused, Did Asterisk fail or memory and possibly a motherboard? On 4/24/2018 12:50 PM, Loren Tedford wrote: Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear.. We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: DuaneVT . Sent: Tuesday, April 24, 2018 11:46 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs Radio Control was referenced as "Auxiliary Service". Per Part 97 : Sec. 97.201 Auxiliary station (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held. (b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments. So 2 meters and above now. 73, Duane KA1LM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
the trick is to have more then one way to skin the cat. 2 failure at the same time is pretty rare, 3 failure even more. the only way I could see such great amount of bad luck would be a direct hit from lightning. take care of your health. 2018-04-24 15:24 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Sorry Pierre for being short winded.. Let me get back to you Tuesday.. Right at the moment Medical issues and relaxation needs to be my priority up until Surgery on Monday.. But yeah I don’t like pi’s that much but in hind site I understand where your coming from.. I don’t like hardware tot either.. But not sure If I am willing to take the chance on software again..
Anyway I will catch every one when I can get back to concentrating on this topic later on..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Pierre Martel <petem001@gmail.com> *Sent: *Tuesday, April 24, 2018 2:18 PM
*To: *Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
yup I did,
Is my post so far off subject for you to ask that question.
I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup..
2018-04-24 15:10 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Hey Pierre by chance did you get to read the entire thread on this?
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Pierre Martel <petem001@gmail.com> *Sent: *Tuesday, April 24, 2018 2:08 PM *To: *Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
*Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router.
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state.
2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Steve Zingman <szingman@msgstor.com> *Sent: *Tuesday, April 24, 2018 12:14 PM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *DuaneVT . <selkie2@comcast.net> *Sent: *Tuesday, April 24, 2018 11:46 AM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service".
Per *Part 97 : **Sec. 97.201 Auxiliary station*
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
“Friends don’t let freinds use USB.” Jim Dixon. On Tue, Apr 24, 2018 at 1:24 PM Pierre Martel <petem001@gmail.com> wrote:
the trick is to have more then one way to skin the cat. 2 failure at the same time is pretty rare, 3 failure even more. the only way I could see such great amount of bad luck would be a direct hit from lightning.
take care of your health.
2018-04-24 15:24 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Sorry Pierre for being short winded.. Let me get back to you Tuesday.. Right at the moment Medical issues and relaxation needs to be my priority up until Surgery on Monday.. But yeah I don’t like pi’s that much but in hind site I understand where your coming from.. I don’t like hardware tot either.. But not sure If I am willing to take the chance on software again..
Anyway I will catch every one when I can get back to concentrating on this topic later on..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Pierre Martel <petem001@gmail.com> *Sent: *Tuesday, April 24, 2018 2:18 PM
*To: *Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
yup I did,
Is my post so far off subject for you to ask that question.
I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup..
2018-04-24 15:10 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Hey Pierre by chance did you get to read the entire thread on this?
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Pierre Martel <petem001@gmail.com> *Sent: *Tuesday, April 24, 2018 2:08 PM *To: *Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org>
*Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router.
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state.
2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *Steve Zingman <szingman@msgstor.com> *Sent: *Tuesday, April 24, 2018 12:14 PM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
*From: *DuaneVT . <selkie2@comcast.net> *Sent: *Tuesday, April 24, 2018 11:46 AM *To: *app_rpt-users@lists.allstarlink.org *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service".
Per *Part 97 : **Sec. 97.201 Auxiliary station*
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
I remember his statement from long ago, and have been reminded of it many times over the past 5 years building and maintaining Allstarlink systems. My issues, and toughest to troubleshoot have all been USB centric... a hardware problem(sigh!) Thanks for the reminder. The quips and wit of “The Duuuude” are surely missed. I’ve been looking for old GPIO threads from the past that addressed using scripts to control the interface for RPi shutdowns and PTT, but have not found them. Any suggestions? Thanks, Bob k6ecm 73 Sent from my iPhone
On Apr 25, 2018, at 2:13 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
“Friends don’t let freinds use USB.” Jim Dixon.
On Tue, Apr 24, 2018 at 1:24 PM Pierre Martel <petem001@gmail.com> wrote: the trick is to have more then one way to skin the cat. 2 failure at the same time is pretty rare, 3 failure even more. the only way I could see such great amount of bad luck would be a direct hit from lightning.
take care of your health.
2018-04-24 15:24 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Sorry Pierre for being short winded.. Let me get back to you Tuesday.. Right at the moment Medical issues and relaxation needs to be my priority up until Surgery on Monday.. But yeah I don’t like pi’s that much but in hind site I understand where your coming from.. I don’t like hardware tot either.. But not sure If I am willing to take the chance on software again..
Anyway I will catch every one when I can get back to concentrating on this topic later on..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
From: Pierre Martel Sent: Tuesday, April 24, 2018 2:18 PM
To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
yup I did,
Is my post so far off subject for you to ask that question.
I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup..
2018-04-24 15:10 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
Hey Pierre by chance did you get to read the entire thread on this?
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
From: Pierre Martel Sent: Tuesday, April 24, 2018 2:08 PM To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router.
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover the geen led to feed the phototransistor (maybe a simple straw would do!) . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C. Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state.
2018-04-24 13:25 GMT-04:00 Loren Tedford <loren@lorentedford.com>:
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
From: Steve Zingman Sent: Tuesday, April 24, 2018 12:14 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com
From: DuaneVT . Sent: Tuesday, April 24, 2018 11:46 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Radio Control was referenced as "Auxiliary Service".
Per Part 97 : Sec. 97.201 Auxiliary station
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (6)
-
Bob Pyke -
DuaneVT . -
Loren Tedford -
Pierre Martel -
Steve Zingman -
Tim Sawyer