Hello, Still having trouble with my DMk URIx dongle. I have installed "uridiag" a standalone program to test a known good unit having returned it to DMK. They were very gracious and tested it for me and found no problems with it. The loop around has been tested for continuity a number of times and tested good each and every time. I appears that I have a driver problem based on the "Unable to" error that is displayed upon opening the program although it finds the URIx. Some of the test appear to work however the "T" test does not nor does it see audio in from the radio however; audio out to the radio is ok. Any help would be appreciated. root@JamestownNY:/usr/bin# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 0d8c:013a C-Media Electronics, Inc. Bus 002 Device 002: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Found CM119 USB Radio Interface at 002/003 Unable to re-open DSP device 1: /dev/dsp1 Menu: For Left Channel: 1 - 1004Hz, 2 - 204Hz, 3 - 300Hz, 4 - 404Hz, 5 - 502Hz 6 - 1502Hz, 7 - 2004Hz, 8 - 3004Hz, 9 - 5004Hz For Right Channel: 11 - 1004Hz, 22 - 204Hz, 33 - 300Hz, 44 - 404Hz, 55 - 502Hz 66 - 1502Hz, 77 - 2004Hz, 88 - 3004Hz, 99 - 5004Hz Tests, etc. t - test normal operation (use uppercase 'T' for verbose output) i - test digital signals only (COR,TONE,PTT,GPIO) e - test EEPROM, E - Initialize EEPROM l - list EEPROM contents c - show test (loopback) connector pinout q,x - exit program Enter your selection:T Testing digital I/O (PTT,COR,TONE and GPIO).... Digital I/O passed!! Testing Analog at 204 (and 700) Hz... Analog level on left channel for 204.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 504 (and 700) Hz... Analog level on left channel for 504.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!!
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote:
Hello,
What version of the asterisk/allstar are you using? What does the device= line look like in your usbradio_tune_usbxxxx.conf look like? Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name -- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us #include funny.quote.here
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer. Thanks for your input. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem On 2/10/2017 2:54 PM, Bruce B Isaacson wrote:
Hello,
What version of the asterisk/allstar are you using? What does the device= line look like in your usbradio_tune_usbxxxx.conf look like? Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name -- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us #include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I chased this for awhile until I realized uridiag does not work with DIAL. Chasing that down was not up very high on anyone's list. I've chased URI and URIx issues, and the likelihood of it being the problem is slim to none. On the other hand, Bryan's suggestions are worth the time chasing :-) Thanks, Bob k6ecm 73 Sent from iPad
On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike@jmbruce.biz> wrote:
Hi Bryan, There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
Thanks for your input.
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan D. Boyle Sent: Friday, February 10, 2017 4:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] DMKx Uri Problem
On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: Hello,
What version of the asterisk/allstar are you using?
What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
Is rpt.conf pointing to the right usb device (should be the rxchannel= line, where usbxxxx in this line should be the same as the usbxxxx in the tune file name
-- Bryan D. Boyle Morrisville PA http://www.wb0yle.com http://www.lotuseuropa.us
#include funny.quote.here _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Bob Pyke -
Bruce B Isaacson -
Bryan D. Boyle