Hi Guys; Moved one of my boxes to a new site that uses OSPF routing. The host has allocated me with a static IP; I have my own Linksys router for firewall and port forwarding. Now the problem is that my Allstar nodes are reporting to the Allstar network with the incorrect IP address. Since that particular IP address does not have port 4569 open, my nodes do not show up on the Allstar status page. So, I'd like to try and force the IP that gets reported to the Allstar network. I was looking at the [general] stanza in the iax.conf file while looking at this reference: http://www.voip-info.org/wiki/view/Asterisk+config+iax.conf .. but unfortunately, the 'externip' parameter can not be used in the [general] stanza. Is there any other way that will allow me to force the 'external IP'? When I use iaxRpt from my notebook and spec' the correct IP / hostname, I can connect without an issue, which confirms that port 4569 is open on the 'correct' IP address. Appreciate some help with this one! Thanks, Ramesh. www.freestar.us
I should have also mentioned, that when I look-up my IP from the command line, I do get the correct IP... My hostname also resolves to the correct IP. The problem is specific to the route that it takes to the Allstar server. Odd thing is that I also have my FREE STAR* HP Thin Client at the same site on the same router (NAT'd to the same WAN IP) and that uses the correct IP when connecting to external reflectors, etc! The problem seems to be specific to the route that the app_rpt box takes to report to the Allstar network (may be this is something that I need to take up with the host controlling the OSPF routing table?) R. On 27/11/2011 9:19 AM, Ramesh Dhami (VA3UV) wrote:
Hi Guys;
Moved one of my boxes to a new site that uses OSPF routing. The host has allocated me with a static IP; I have my own Linksys router for firewall and port forwarding.
Now the problem is that my Allstar nodes are reporting to the Allstar network with the incorrect IP address. Since that particular IP address does not have port 4569 open, my nodes do not show up on the Allstar status page.
So, I'd like to try and force the IP that gets reported to the Allstar network. I was looking at the [general] stanza in the iax.conf file while looking at this reference:
http://www.voip-info.org/wiki/view/Asterisk+config+iax.conf
.. but unfortunately, the 'externip' parameter can not be used in the [general] stanza. Is there any other way that will allow me to force the 'external IP'?
When I use iaxRpt from my notebook and spec' the correct IP / hostname, I can connect without an issue, which confirms that port 4569 is open on the 'correct' IP address.
Appreciate some help with this one!
Thanks,
Ramesh.
www.freestar.us
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Make sure u have a port forwarding rule for UDP 4569 Leon Sent from my iPhone On Nov 27, 2011, at 9:32 AM, "Ramesh Dhami (VA3UV)" <Ramesh@va3uv.com> wrote:
I should have also mentioned, that when I look-up my IP from the command line, I do get the correct IP...
My hostname also resolves to the correct IP.
The problem is specific to the route that it takes to the Allstar server.
Odd thing is that I also have my FREE STAR* HP Thin Client at the same site on the same router (NAT'd to the same WAN IP) and that uses the correct IP when connecting to external reflectors, etc!
The problem seems to be specific to the route that the app_rpt box takes to report to the Allstar network (may be this is something that I need to take up with the host controlling the OSPF routing table?)
R.
On 27/11/2011 9:19 AM, Ramesh Dhami (VA3UV) wrote:
Hi Guys;
Moved one of my boxes to a new site that uses OSPF routing. The host has allocated me with a static IP; I have my own Linksys router for firewall and port forwarding.
Now the problem is that my Allstar nodes are reporting to the Allstar network with the incorrect IP address. Since that particular IP address does not have port 4569 open, my nodes do not show up on the Allstar status page.
So, I'd like to try and force the IP that gets reported to the Allstar network. I was looking at the [general] stanza in the iax.conf file while looking at this reference:
http://www.voip-info.org/wiki/view/Asterisk+config+iax.conf
.. but unfortunately, the 'externip' parameter can not be used in the [general] stanza. Is there any other way that will allow me to force the 'external IP'?
When I use iaxRpt from my notebook and spec' the correct IP / hostname, I can connect without an issue, which confirms that port 4569 is open on the 'correct' IP address.
Appreciate some help with this one!
Thanks,
Ramesh.
www.freestar.us
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yep - already have that (see my note). R. Sent on the TELUS Mobility network with BlackBerry -----Original Message----- From: "Leon D. Zetekoff" <wa4zlw@arrl.net> Date: Sun, 27 Nov 2011 10:24:21 To: Ramesh Dhami (VA3UV)<Ramesh@va3uv.com> Cc: app_rpt-users@ohnosec.org<app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] IAX Register Make sure u have a port forwarding rule for UDP 4569 Leon Sent from my iPhone On Nov 27, 2011, at 9:32 AM, "Ramesh Dhami (VA3UV)" <Ramesh@va3uv.com> wrote:
I should have also mentioned, that when I look-up my IP from the command line, I do get the correct IP...
My hostname also resolves to the correct IP.
The problem is specific to the route that it takes to the Allstar server.
Odd thing is that I also have my FREE STAR* HP Thin Client at the same site on the same router (NAT'd to the same WAN IP) and that uses the correct IP when connecting to external reflectors, etc!
The problem seems to be specific to the route that the app_rpt box takes to report to the Allstar network (may be this is something that I need to take up with the host controlling the OSPF routing table?)
R.
On 27/11/2011 9:19 AM, Ramesh Dhami (VA3UV) wrote:
Hi Guys;
Moved one of my boxes to a new site that uses OSPF routing. The host has allocated me with a static IP; I have my own Linksys router for firewall and port forwarding.
Now the problem is that my Allstar nodes are reporting to the Allstar network with the incorrect IP address. Since that particular IP address does not have port 4569 open, my nodes do not show up on the Allstar status page.
So, I'd like to try and force the IP that gets reported to the Allstar network. I was looking at the [general] stanza in the iax.conf file while looking at this reference:
http://www.voip-info.org/wiki/view/Asterisk+config+iax.conf
.. but unfortunately, the 'externip' parameter can not be used in the [general] stanza. Is there any other way that will allow me to force the 'external IP'?
When I use iaxRpt from my notebook and spec' the correct IP / hostname, I can connect without an issue, which confirms that port 4569 is open on the 'correct' IP address.
Appreciate some help with this one!
Thanks,
Ramesh.
www.freestar.us
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Leon D. Zetekoff -
Ramesh Dhami (VA3UV) -
Ramesh Dhami, VA3UV/M