Re: [App_rpt-users] Not able to receive incoming connections
Gene, There is no way to "force" something through a router that is miss-configured or not working correctly. In the router you should be able to port forward and you need the following ports forwarded 4569 udp 222 tcp It is important that you specify udp and tcp. In some case you can say 'both' Both ports should be forwarded to your Allstar box IP address. Without 4569 no one will be able to connect to you. Without 222 no one will be able to administratively connect to your allstar. There is no way around this you need the forwards to work. In a pinch you could setup DMZ in the router to the allstar box and see if it works. If it doesn't you have other problems but if it does then you know you port forwarding is incorrect. I don't know your router but there is probably someone else on here that could help. I know with the Verizon FIOS routers you need specify the from port and IP as any and the to port and Ip as the ones you want it to go to. Specifying the from port as a specific number even if it is the right number does not work. 73 Doug WA3DSP http://www.crompton.com/hamradio From: gene@wb9coy.com To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Not able to receive incoming connections Date: Tue, 23 Sep 2014 22:37:21 -0700 Hi Doug, thanks for the response. My router is an ATT U-Verse I have NAT to port 4569 and 222. For some reason I can not connect to it. It shows up on the Web Xcvr. I am able to have QSOs on node 2003. I think it is an in-bound issue. I read on the AllStar pages that a sys admin might have to force port 4569 on the AllStar side. I am writting to this mail list because I am stuck on why I can not conntec to my node which is 41303 -------- Original Message -------- Subject: RE: [App_rpt-users] Not able to receive incoming connections From: Doug Crompton <doug@crompton.com> Date: Tue, September 23, 2014 4:38 pm To: "gene@wb9coy.com" <gene@wb9coy.com> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Gene, Not sure what you mean by forced but you need to port foward port 4569 upd to the IP address of your Allstar computer. The Allstar computer should be set as a static IP address on your local network so that the local address does not change. In addition if you want to access your system remotely or have someone else do it for maintenance you need to port forward port 222 tcp to the IP address of your Allstar computer. 73 Doug WA3DSP http://www.crompton.com/hamradio
From: gene@wb9coy.com To: app_rpt-users@ohnosec.org Date: Tue, 23 Sep 2014 15:34:22 -0700 Subject: [App_rpt-users] Not able to receive incoming connections
My node is 41303 W6QAR
I have verified that I NAT on port 4569. It was mentioned that a check can be done on my node to see if it had to be forced.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
You node is not reporting to the allstar server. First make sure you have these lines uncommented in your node: statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null ; Get the system list for this server statpost_url=http://stats.allstarlink.org/uhandler.php And then make sure you /etc/resolv.conf file has a valid namserver in it if your box is on a static IP. nameserver 8.8.8.8 Then if you node statrs to report to the Allstar site then after 15 min or so nodes should be able to connect. This assumes you do have all the ports properly forwarded in your router. Jon On 9/24/2014 2:36 AM, Doug Crompton wrote:
Gene,
There is no way to "force" something through a router that is miss-configured or not working correctly.
In the router you should be able to port forward and you need the following ports forwarded
4569 udp 222 tcp
It is important that you specify udp and tcp. In some case you can say 'both'
Both ports should be forwarded to your Allstar box IP address. Without 4569 no one will be able to connect to you. Without 222 no one will be able to administratively connect to your allstar.
There is no way around this you need the forwards to work. In a pinch you could setup DMZ in the router to the allstar box and see if it works. If it doesn't you have other problems but if it does then you know you port forwarding is incorrect.
I don't know your router but there is probably someone else on here that could help. I know with the Verizon FIOS routers you need specify the from port and IP as any and the to port and Ip as the ones you want it to go to. Specifying the from port as a specific number even if it is the right number does not work.
*73 Doug WA3DSP http://www.crompton.com/hamradio*
------------------------------------------------------------------------ From: gene@wb9coy.com To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Not able to receive incoming connections Date: Tue, 23 Sep 2014 22:37:21 -0700
Hi Doug, thanks for the response. My router is an ATT U-Verse I have NAT to port 4569 and 222. For some reason I can not connect to it. It shows up on the Web Xcvr. I am able to have QSOs on node 2003. I think it is an in-bound issue. I read on the AllStar pages that a sys admin might have to force port 4569 on the AllStar side. I am writting to this mail list because I am stuck on why I can not conntec to my node which is 41303
-------- Original Message -------- Subject: RE: [App_rpt-users] Not able to receive incoming connections From: Doug Crompton <doug@crompton.com <mailto:doug@crompton.com>> Date: Tue, September 23, 2014 4:38 pm To: "gene@wb9coy.com <mailto:gene@wb9coy.com>" <gene@wb9coy.com <mailto:gene@wb9coy.com>> Cc: "app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org>" <app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org>>
Gene,
Not sure what you mean by forced but you need to port foward port 4569 upd to the IP address of your Allstar computer. The Allstar computer should be set as a static IP address on your local network so that the local address does not change.
In addition if you want to access your system remotely or have someone else do it for maintenance you need to port forward port 222 tcp to the IP address of your Allstar computer.
*73 Doug WA3DSP http://www.crompton.com/hamradio*
> From:gene@wb9coy.com <mailto:gene@wb9coy.com> > To: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> > Date: Tue, 23 Sep 2014 15:34:22 -0700 > Subject: [App_rpt-users] Not able to receive incoming connections > > My node is 41303 W6QAR > > I have verified that I NAT on port 4569. It was mentioned that a check > can be done on my node to see if it had to be forced. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Doug Crompton -
gene＠wb9coy.com -
Jon Rorke