Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
Did you follow these instructionsfrom the readme ? http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-... Run the following commands after the first time you boot. sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot at the # prompt run "asl-menu" to setup your node. ...mike/kb8jnm On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-...
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot. If you have some other 4gb+ SD card, why not try it again fresh and be sure. ...mike/kb8jnm On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-...
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Ok sounds good I will try it and report back, thanks. Clifford On Mon, Sep 3, 2018, 3:37 PM Mike <mm@midnighteng.com> wrote:
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot.
If you have some other 4gb+ SD card, why not try it again fresh and be sure.
...mike/kb8jnm
On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-...
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get
this
message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Just realized something- I never used the image- I am installing stretch from latest build and ASL from dvswitch repository using these instructions- https://wiki.allstarlink.org/wiki/ASL_FAQ Clifford -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, September 03, 2018 3:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?) I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot. If you have some other 4gb+ SD card, why not try it again fresh and be sure. ...mike/kb8jnm On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20 180228-armhf-raspbian-stretch-image.readme
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Quick and easy. http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ Get the image to sd card, https://sourceforge.net/projects/win32diskimager/ run first boot as per the readme Run the following commands after the first time you boot. sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot at the # prompt run "asl-menu" to setup your node. done ! When you have a working ASL Pi, Pull your SD card and create a back-up image from the SD ! 'For now' this is the preferred method. Should be a update coming to fix the upgrade issues with kernel/sound and change this. ...mike/kb8jnm On 9/4/2018 12:52 AM, cnovey wrote:
Just realized something- I never used the image- I am installing stretch from latest build and ASL from dvswitch repository using these instructions-
https://wiki.allstarlink.org/wiki/ASL_FAQ Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, September 03, 2018 3:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot.
If you have some other 4gb+ SD card, why not try it again fresh and be sure.
...mike/kb8jnm
On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20 180228-armhf-raspbian-stretch-image.readme
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
ok new node up and running using the image and headers hold instructions. Everything works but still no connect from Zoiper and no allmon2 but will work on those later. iaxrpt software works/connects fine. Also- I like having a gui- any suggestions? I had it with stock stretch install. Is there any downside to installing/enabling gui? Thanks again- Clifford KK6QMS -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, September 04, 2018 8:10 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?) Quick and easy. http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ Get the image to sd card, https://sourceforge.net/projects/win32diskimager/ run first boot as per the readme Run the following commands after the first time you boot. sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot at the # prompt run "asl-menu" to setup your node. done ! When you have a working ASL Pi, Pull your SD card and create a back-up image from the SD ! 'For now' this is the preferred method. Should be a update coming to fix the upgrade issues with kernel/sound and change this. ...mike/kb8jnm On 9/4/2018 12:52 AM, cnovey wrote:
Just realized something- I never used the image- I am installing stretch from latest build and ASL from dvswitch repository using these instructions-
https://wiki.allstarlink.org/wiki/ASL_FAQ Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, September 03, 2018 3:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot.
If you have some other 4gb+ SD card, why not try it again fresh and be sure.
...mike/kb8jnm
On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-2 0 180228-armhf-raspbian-stretch-image.readme
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Considering you have no more than 1gb ram to play with, a GUI is not advisable even if possible. If you did do this, it If you are using a program like WinSCP to manipulate the files, IAXRPT to run remotely. I do have a 3B+ running ASL with a DMR bridge, a recorder node, has Allmon2 installed. So enough room and speed for that stuff. that would be as far as I would go. leave some ram to play with something else in the future. I'm sure you will find the issues for the other things. ...mike/kb8jnm On 9/4/2018 4:29 PM, cnovey wrote:
ok new node up and running using the image and headers hold instructions. Everything works but still no connect from Zoiper and no allmon2 but will work on those later. iaxrpt software works/connects fine. Also- I like having a gui- any suggestions? I had it with stock stretch install. Is there any downside to installing/enabling gui? Thanks again- Clifford KK6QMS
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, September 04, 2018 8:10 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
Quick and easy.
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ Get the image to sd card, https://sourceforge.net/projects/win32diskimager/
run first boot as per the readme Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
done !
When you have a working ASL Pi, Pull your SD card and create a back-up image from the SD !
'For now' this is the preferred method. Should be a update coming to fix the upgrade issues with kernel/sound and change this.
...mike/kb8jnm
On 9/4/2018 12:52 AM, cnovey wrote:
Just realized something- I never used the image- I am installing stretch from latest build and ASL from dvswitch repository using these instructions-
https://wiki.allstarlink.org/wiki/ASL_FAQ Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, September 03, 2018 3:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot.
If you have some other 4gb+ SD card, why not try it again fresh and be sure.
...mike/kb8jnm
On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-2 0 180228-armhf-raspbian-stretch-image.readme
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I don’t know if this has changed, but it’s been my understanding that both the GUI and Allstar want to have control of the server, which, if true, would impact the real-time requirements of asterisk. Thanks, Bob k6ecm 73 Sent from my iPhone
On Sep 4, 2018, at 1:29 PM, cnovey <cnovey@gmail.com> wrote:
ok new node up and running using the image and headers hold instructions. Everything works but still no connect from Zoiper and no allmon2 but will work on those later. iaxrpt software works/connects fine. Also- I like having a gui- any suggestions? I had it with stock stretch install. Is there any downside to installing/enabling gui? Thanks again- Clifford KK6QMS
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, September 04, 2018 8:10 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
Quick and easy.
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ Get the image to sd card, https://sourceforge.net/projects/win32diskimager/
run first boot as per the readme Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
done !
When you have a working ASL Pi, Pull your SD card and create a back-up image from the SD !
'For now' this is the preferred method. Should be a update coming to fix the upgrade issues with kernel/sound and change this.
...mike/kb8jnm
On 9/4/2018 12:52 AM, cnovey wrote: Just realized something- I never used the image- I am installing stretch from latest build and ASL from dvswitch repository using these instructions-
https://wiki.allstarlink.org/wiki/ASL_FAQ Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, September 03, 2018 3:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot.
If you have some other 4gb+ SD card, why not try it again fresh and be sure.
...mike/kb8jnm
On 9/3/2018 6:30 PM, Clifford Novey wrote: I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-2 0 180228-armhf-raspbian-stretch-image.readme
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote: Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I ran w GUI and seemed fine. Was convenient to have browser, text editor etc. I will leave it as it is though and improve my command line skills! Also to install Midnight Commander I had to un-comment a repository, is that ok in light of the kernel header hold etc. Any reason that would not be a good idea? Thanks Clifford KK6QMS On Tue, Sep 4, 2018, 2:05 PM Mike <mm@midnighteng.com> wrote:
Considering you have no more than 1gb ram to play with, a GUI is not advisable even if possible. If you did do this, it
If you are using a program like WinSCP to manipulate the files, IAXRPT to run remotely. I do have a 3B+ running ASL with a DMR bridge, a recorder node, has Allmon2 installed. So enough room and speed for that stuff. that would be as far as I would go. leave some ram to play with something else in the future. I'm sure you will find the issues for the other things.
...mike/kb8jnm
On 9/4/2018 4:29 PM, cnovey wrote:
ok new node up and running using the image and headers hold instructions. Everything works but still no connect from Zoiper and no allmon2 but will work on those later. iaxrpt software works/connects fine. Also- I like having a gui- any suggestions? I had it with stock stretch install. Is there any downside to installing/enabling gui? Thanks again- Clifford KK6QMS
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, September 04, 2018 8:10 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
Quick and easy.
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ Get the image to sd card, https://sourceforge.net/projects/win32diskimager/
run first boot as per the readme Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
done !
When you have a working ASL Pi, Pull your SD card and create a back-up image from the SD !
'For now' this is the preferred method. Should be a update coming to fix the upgrade issues with kernel/sound and change this.
...mike/kb8jnm
On 9/4/2018 12:52 AM, cnovey wrote:
Just realized something- I never used the image- I am installing stretch from latest build and ASL from dvswitch repository using these instructions-
https://wiki.allstarlink.org/wiki/ASL_FAQ Clifford
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, September 03, 2018 3:37 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Ideas re: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
I have seen many strange things when/if you update/upgrade without putting a hold on updating the kernel headers. Do it first on first boot.
If you have some other 4gb+ SD card, why not try it again fresh and be sure.
...mike/kb8jnm
On 9/3/2018 6:30 PM, Clifford Novey wrote:
I am not sure if I did during first install. I did try it sometime after. Does it require fresh install to be effective? Thanks Clifford
On Mon, Sep 3, 2018, 3:04 PM Mike <mm@midnighteng.com> wrote:
Did you follow these instructionsfrom the readme ?
http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-2 0 180228-armhf-raspbian-stretch-image.readme
Run the following commands after the first time you boot.
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot
at the # prompt run "asl-menu" to setup your node.
...mike/kb8jnm
On 9/3/2018 5:19 PM, Clifford Novey wrote:
Pi stretch, stock allstar install and allmon2. Using asl-menu I get this message. Have tried to create the dir w diff permissions and owners. I use pi not root for main user. Ideas as to how I can solve or what the core issue may be? Thanks Clifford KK6QMS
IAX2 show registry: Unable to connect to remote asterisk (does/var/run/asterisk/asterisk.ctl exist?)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bob Pyke -
Clifford Novey -
cnovey
-
Mike