Thanks. Just started looking into this also. Any tips on a way to secure SIP dial-in with unique password for each user? Regards, Roger Bly k6mwt On May 20, 2014, at 2:06 PM, Steve Wright <stevewrightnz@gmail.com> wrote:

You have quite a few options when connecting SIP phones or other toys to the repeater network. You might add SIP config to the repeater node, and have SIP devices connect to it directly, or add another SIP server nearby and trunk the two machines.

I looked at doing the same thing some ago, and I did manage to get SIP devices connecting directly to the repeater node, but it was just an experiment and was never put into service - but I could certainly dial in and connect audio to the node.

I think if I was doing the job again, I would experiment with a separate machine for the SIP phone server software - perhaps install one of the commonly available Asterisk distributions for that task, and then peer that machine with the repeater node. This is added machinery, but I think it will make both of the systems much easier to build and maintain.

Steve ZL1BHD

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.