Be sure you have set duplex=1 with the asl-menu or edit rpt.conf. Also the 119b chips need the level turned up almost all the way. On Sun, Jan 20, 2019 at 7:36 AM Jim Hertel <n6kmr@frontiernet.net> wrote:

Down loaded & installed the Pi3 allstarlink asterick (node 47379), have the Uri-B with factory cables, and cables to the RC210. I think I have it right. Port forwarding, UDP 4569 is pointing to the unit(repeater).

RC210 is in non repeat for the Pi's connected port.

The Pi key's the RC210 when booting up, which key's the associated units connected to the 210, Plus the long hangtime is there 4 seconds..

have no audio,

any Ideas?

Thanks in advance!

JIm n6kmr

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- Tim WD6AWP