First check your connectivity. Ping google.com at the Linux command prompt. If connectivity Then' Try service asterisk restart at the Linux command prompt, then wait a few minutes... Some Tim's up to 15 minutes Thanks, Bob kk6ecm Sent from iPad

On Oct 6, 2014, at 7:21 AM, "alberto e. puig" <alberto_e_puig@hotmail.com> wrote:

Have tried everything I can think of,unsuccessfully... Re-submitting my servers and nodes info. The statpost lines for my nodes are not commented - semicolon before them, nothing has worked.

Any ideas? The hardest way, should I try running CentOS acid again on my computers-servers? Is there is a easier way on doing this? Can some one administering the main servers help?

All suggestions welcome.

Thanks,

...

From: app_rpt-users-request@ohnosec.org Subject: App_rpt-users Digest, Vol 68, Issue 6 To: app_rpt-users@ohnosec.org Date: Sun, 5 Oct 2014 12:00:02 -0400

Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org

You can reach the person managing the list at app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

Today's Topics:

1. Re: Node 40660 is no longer in the database ... (Doug Crompton) 2. SIMPLE USB and regular usb.conf (Bradley Haney) 3. Re: SIMPLE USB and regular usb.conf (Doug Crompton)

----------------------------------------------------------------------

Message: 1 Date: Sat, 4 Oct 2014 15:25:15 -0400 From: Doug Crompton <doug@crompton.com> To: "alberto e. puig" <alberto_e_puig@hotmail.com>, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Node 40660 is no longer in the database ... Message-ID: <BLU172-W52395B9EBCCE786D7B8BACBAA70@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"

Alberto,

I don't see you listed here either. You are registered however -

40660=radio@190.166.134.128:4569/40660,190.166.134.128

Look at /etc/asterisk/rpt.conf with your editor and make sure the statpost lines for your node are not commented - semicolon before them. If so remove the semicolons and reboot.

; *** Status Reporting *** ; ; Uncomment the following two statpost lines to report the status of your node to stats.allstarlink.org ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates

Remove semicolons on these two above statpost lines

Also note that this is a per node setting so if you have other nodes configured in rpt.conf you would need to uncomment them also if you wanted them listed.

This is what sends your status information to the server. It is not necessary for the system to operate but without it you will not appear on the list and other Allstar users will not know you are there. Sometimes this may be what you want! 73 Doug WA3DSP http://www.crompton.com/hamradio

From: alberto_e_puig@hotmail.com To: app_rpt-users@ohnosec.org Date: Sat, 4 Oct 2014 06:43:20 -0400 Subject: [App_rpt-users] Node 40660 is no longer in the database ...

Hi everyone,

New to Allstar Link System. Everything is working just fine. I can still be able to use my node but in the last 2 days I cannot find my node info; on the Active Node List (Node 40660 is no longer in the database). The info. is being listed on the Allstar Link -- Node List as registered.

KP4AP

40660

446.450 mHz 100.0 Sto Domingo,DN Dom.Rep.

Dominican Republic QTH www.kp4ip.com

Any help or suggestions will be appreciated.

Regards and 73s,

KP4AP

Alberto

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.