Hi All, One of my repeater sites is served by a WISP. One of the VoIP speed testing sites reports that the jitter will be too high for VoIP use. Below is the report from the WISP line. My question is can I increase the buffering (on one or both nodes) to overcome known jitter conditions? I am assuming that would induce some delay. 200-700ms additional delay would be fine by me.. 73's - Pete ======================================================================== ===================== Speed test statistics --------------------- Download speed: 371944 bps Upload speed: 82352 bps Download consistency of service: 35 % Upload consistency of service: 4 % Download test type: socket Upload test type: socket Maximum TCP delay: 1424 ms Average download pause: 39 ms Minimum round trip time to server: 63 ms Average round trip time to server: 89 ms Estimated download bandwidth: 1680000bps Route concurrency: 4.516809 Download TCP forced idle: 0 % Maximum route speed: 8321904bps VoIP test statistics -------------------- Jitter: you --> server: 43.8 ms Jitter: server --> you: 8.6 ms Packet loss: you --> server: 0.0 % Packet loss: server --> you: 0.0 % Packet discards: 10.6 % Packets out of order: 0.0 % Estimated MOS score: 3.0