Hello everyone, I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type of report to find out who is using these programs my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3 is it possible to make these LOGs Thank you for your help Luc VE2LUQ
In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk. On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet@cgocable.ca> wrote:
Hello everyone,
I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords
with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2- 3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type of report to find out who is using these programs
my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3
is it possible to make these LOGs
Thank you for your help
Luc VE2LUQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
instead of restarting askerisk...you can go into the asterisk CLI, and type “iax2 reload” (without the “ “) and do a fresh reload of the isx config without having to restart the whole repeater...:) -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer@gmail.com> wrote:
In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk.
On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet@cgocable.ca> wrote: Hello everyone,
I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords
with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type of report to find out who is using these programs
my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3
is it possible to make these LOGs
Thank you for your help
Luc VE2LUQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thank you for this info to do the reload only of the file that I just modified, I always made a complete reboot of my Raspberry Pi which has a big difference I am a novice and I learn, Thank you to all of you Luc
Le 17 mars 2018 à 11:31, Bryan D. Boyle <bdboyle@bdboyle.com> a écrit :
instead of restarting askerisk...you can go into the asterisk CLI, and type “iax2 reload” (without the “ “) and do a fresh reload of the isx config without having to restart the whole repeater...:)
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer@gmail.com <mailto:tisawyer@gmail.com>> wrote:
In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk.
On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet@cgocable.ca <mailto:ldrolet@cgocable.ca>> wrote: Hello everyone,
I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords
with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe <https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe> from Mr. Crompton is it possible to do this type of report to find out who is using these programs
my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3
is it possible to make these LOGs
Thank you for your help
Luc VE2LUQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
mon plasir, Luc -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 17, 2018, at 19:07, Luc Drolet <ldrolet@cgocable.ca> wrote:
Thank you for this info to do the reload only of the file that I just modified, I always made a complete reboot of my Raspberry Pi
which has a big difference
I am a novice and I learn,
Thank you to all of you
Luc
Le 17 mars 2018 à 11:31, Bryan D. Boyle <bdboyle@bdboyle.com> a écrit :
instead of restarting askerisk...you can go into the asterisk CLI, and type “iax2 reload” (without the “ “) and do a fresh reload of the isx config without having to restart the whole repeater...:)
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer@gmail.com> wrote:
In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk.
On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet@cgocable.ca> wrote: Hello everyone,
I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords
with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type of report to find out who is using these programs
my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3
is it possible to make these LOGs
Thank you for your help
Luc VE2LUQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yeah, I know. But the HamVoIP types have a menu for common tasks including restarting asterisk so that's easier for them. On Sat, Mar 17, 2018 at 8:31 AM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote:
instead of restarting askerisk...you can go into the asterisk CLI, and type “iax2 reload” (without the “ “) and do a fresh reload of the isx config without having to restart the whole repeater...:)
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer@gmail.com> wrote:
In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk.
On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet@cgocable.ca> wrote:
Hello everyone,
I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords
with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2- 3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type of report to find out who is using these programs
my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3
is it possible to make these LOGs
Thank you for your help
Luc VE2LUQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
Hello everyone, What I want to do is to know when I have users who use programs like ZOIPER and IAXRPT, I want to do LOG once a month, to know who uses programs, at the end of each month I would like to know the date and time that will use these programs is it possible with a raspberry PI version 1.5 of Mr. Crompton, I did research on the internet and I can not see anything Thank you for your help Luke
Le 17 mars 2018 à 20:04, Tim Sawyer <tisawyer@gmail.com> a écrit :
Yeah, I know. But the HamVoIP types have a menu for common tasks including restarting asterisk so that's easier for them.
On Sat, Mar 17, 2018 at 8:31 AM, Bryan D. Boyle <bdboyle@bdboyle.com <mailto:bdboyle@bdboyle.com>> wrote: instead of restarting askerisk...you can go into the asterisk CLI, and type “iax2 reload” (without the “ “) and do a fresh reload of the isx config without having to restart the whole repeater...:)
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Mar 17, 2018, at 09:55, Tim Sawyer <tisawyer@gmail.com <mailto:tisawyer@gmail.com>> wrote:
In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and Zoiper login. Duplicate that stanza and then give it new stanza heading such as [zoiper]. Change the secret if a different one is desired for zoiper. Then restart Asterisk.
On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet@cgocable.ca <mailto:ldrolet@cgocable.ca>> wrote: Hello everyone,
I would like to have LOGS from my used IAXRPT and ZOIPER so they all have a different usernames and passwords
with XELATEC we could make these reports, but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe <https://hamvoip.org/RPi2/RPi2-3_V1.5rc16_Allstar.exe> from Mr. Crompton is it possible to do this type of report to find out who is using these programs
my NODE is not connecting with ALLSTAR, it's a private NODE I use a raspberry PI 3
is it possible to make these LOGs
Thank you for your help
Luc VE2LUQ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Bryan D. Boyle -
Luc Drolet -
Tim Sawyer