is there any way to change the PL values on the run, or does it require a full restart, since it's not a rpt function as much as it is in the USB module? Just taking my nuclear option a bit further and actually have scripts to do so based on a function call (I put them in /etc/asterisk/scripts/lidon.sh and lidoff.sh), but right now, the script does an asterisk -rx "restart now" (reload just didn't read the usbradio.conf file,) Would like it to be a bit less 'nuclear' than aggravating my upstream hub sysop and other users who may be listening... Gentle direction appreciated... BB
You are using a Fly to generate your PL tone?? Does that mean that to generate 107.2 Hz, you would have to use one Bee instead :-). JIM
Date: Sun, 12 Feb 2012 16:46:31 -0500 From: bdboyle@bdboyle.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] changing PL on the fly
is there any way to change the PL values on the run, or does it require a full restart, since it's not a rpt function as much as it is in the USB module?
Just taking my nuclear option a bit further and actually have scripts to do so based on a function call (I put them in /etc/asterisk/scripts/lidon.sh and lidoff.sh), but right now, the script does an asterisk -rx "restart now" (reload just didn't read the usbradio.conf file,)
Would like it to be a bit less 'nuclear' than aggravating my upstream hub sysop and other users who may be listening...
Gentle direction appreciated...
BB _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Bryan D. Boyle -
Jim Duuuude