I finally got my IRLP node fully functional, now it's time to move on to allstar, etc. BUT I'm totally stuck. I tried to install Xipar and it's built on such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A) because I don't want to put a CD on my Atom board, and B) even though I have a bootable usb stick with ACID on it, about half way through the install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse. so as a last ditch effort, I decided to try a manual install. Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org. So.. Let me try this again with some people who may really know what's going on. I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar. Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site? I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in. I've got lots o linux experience, just none as it relates to this ROIP stuff. Thanks in advance, any suggestions welcome. Alan
http://stats.allstarlink.org/dl/installcd/ should have what your looking for.... If you manage to get it working under Debian Squeeze, let us know. I had it working under Lenny just fine, not so easily with Squeeze. Stephen K1LNX ________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] on behalf of Alan Adamson [adamson_alan@hotmail.com] Sent: Tuesday, May 22, 2012 10:45 AM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Where to start? I finally got my IRLP node fully functional, now it's time to move on to allstar, etc. BUT I'm totally stuck. I tried to install Xipar and it's built on such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A) because I don't want to put a CD on my Atom board, and B) even though I have a bootable usb stick with ACID on it, about half way through the install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse. so as a last ditch effort, I decided to try a manual install… Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org. So…. Let me try this again with some people who may really know what's going on. I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar. Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site? I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in… I've got lots o linux experience, just none as it relates to this ROIP stuff. Thanks in advance, any suggestions welcome. Alan
Stephen. Here's my problem. stats.allstarlink.org (which is also dl.allstarlink.org) seems to be down. so I can't get anything functional at the moment :(. Alan From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Stephen - K1LNX Sent: Tuesday, May 22, 2012 10:49 AM To: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Where to start? http://stats.allstarlink.org/dl/installcd/ should have what your looking for.... If you manage to get it working under Debian Squeeze, let us know. I had it working under Lenny just fine, not so easily with Squeeze. Stephen K1LNX _____ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] on behalf of Alan Adamson [adamson_alan@hotmail.com] Sent: Tuesday, May 22, 2012 10:45 AM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Where to start? I finally got my IRLP node fully functional, now it's time to move on to allstar, etc. BUT I'm totally stuck. I tried to install Xipar and it's built on such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A) because I don't want to put a CD on my Atom board, and B) even though I have a bootable usb stick with ACID on it, about half way through the install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse. so as a last ditch effort, I decided to try a manual install. Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org. So.. Let me try this again with some people who may really know what's going on. I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar. Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site? I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in. I've got lots o linux experience, just none as it relates to this ROIP stuff. Thanks in advance, any suggestions welcome. Alan
http://stats.allstarlink.org/dl/ works fine for me -- Thanks in Advance Bob Brown, WØNQX Kansas City Metro Area http://sm0kenet.net http://byrg.net http://kcdstar.byrg.net http://w0nqx.blogspot.com Quis custodiet ipsos custodes? Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK -- On Tue, May 22, 2012 at 9:52 AM, Alan Adamson <adamson_alan@hotmail.com> wrote:
Stephen… Here's my problem… stats.allstarlink.org (which is also dl.allstarlink.org) seems to be down… so I can't get anything functional at the moment :(…
Alan
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Stephen - K1LNX Sent: Tuesday, May 22, 2012 10:49 AM To: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Where to start?
http://stats.allstarlink.org/dl/installcd/ should have what your looking for....
If you manage to get it working under Debian Squeeze, let us know. I had it working under Lenny just fine, not so easily with Squeeze.
Stephen
K1LNX
________________________________
From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] on behalf of Alan Adamson [adamson_alan@hotmail.com] Sent: Tuesday, May 22, 2012 10:45 AM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Where to start?
I finally got my IRLP node fully functional, now it's time to move on to allstar, etc.
BUT I'm totally stuck. I tried to install Xipar and it's built on such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A) because I don't want to put a CD on my Atom board, and B) even though I have a bootable usb stick with ACID on it, about half way through the install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse.
so as a last ditch effort, I decided to try a manual install… Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org.
So…. Let me try this again with some people who may really know what's going on.
I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar.
Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site?
I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in… I've got lots o linux experience, just none as it relates to this ROIP stuff.
Thanks in advance, any suggestions welcome.
Alan
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Hmm... Wonder if there is a DNS issue somewhere in the internet.... if I try to go to stats.allstarlink.org or dl.allstarlink.org, etc... I get zero response and just a huge long pause before either chrome replies that it's not there or my script fails... Might be time to pull out the cell modem and see what that does for me... Can you give me the IP address that stats.allstarlink.org comes back with from your end please? Thanks, Alan -----Original Message----- From: Bob Brown - WØNQX [mailto:bbrown@byrg.net] Sent: Tuesday, May 22, 2012 10:55 AM To: Alan Adamson Cc: Stephen - K1LNX; App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Where to start? http://stats.allstarlink.org/dl/ works fine for me -- Thanks in Advance Bob Brown, WØNQX Kansas City Metro Area http://sm0kenet.net http://byrg.net http://kcdstar.byrg.net http://w0nqx.blogspot.com Quis custodiet ipsos custodes? Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK -- On Tue, May 22, 2012 at 9:52 AM, Alan Adamson <adamson_alan@hotmail.com> wrote:
Stephen Here's my problem stats.allstarlink.org (which is also dl.allstarlink.org) seems to be down so I can't get anything functional at the moment :(
Alan
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Stephen - K1LNX Sent: Tuesday, May 22, 2012 10:49 AM To: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Where to start?
http://stats.allstarlink.org/dl/installcd/ should have what your looking for....
If you manage to get it working under Debian Squeeze, let us know. I had it working under Lenny just fine, not so easily with Squeeze.
Stephen
K1LNX
________________________________
From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] on behalf of Alan Adamson [adamson_alan@hotmail.com] Sent: Tuesday, May 22, 2012 10:45 AM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Where to start?
I finally got my IRLP node fully functional, now it's time to move on to allstar, etc.
BUT I'm totally stuck. I tried to install Xipar and it's built on such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A) because I don't want to put a CD on my Atom board, and B) even though I have a bootable usb stick with ACID on it, about half way through the install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse.
so as a last ditch effort, I decided to try a manual install Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org.
So . Let me try this again with some people who may really know what's going on.
I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar.
Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site?
I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in I've got lots o linux experience, just none as it relates to this ROIP stuff.
Thanks in advance, any suggestions welcome.
Alan
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Alan, I'm running node 28174 on an Atom processor in an Acer Aspire One booting from a USB stick. I disconnected the hard drives on another computer, used the ACID CD to install on the USB, then booted the Acer from the USB. Thanks to udev all the hardware changes were handled without issues. Ron KA7U Connected by DROID on Verizon Wireless -----Original message----- From: Alan Adamson <adamson_alan@hotmail.com> To: App_rpt-users@ohnosec.org Sent: Tue, May 22, 2012 14:45:06 GMT+00:00 Subject: [App_rpt-users] Where to start? I finally got my IRLP node fully functional, now it's time to move on to allstar, etc. BUT I'm totally stuck. I tried to install Xipar and it's built on such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A) because I don't want to put a CD on my Atom board, and B) even though I have a bootable usb stick with ACID on it, about half way through the install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse. so as a last ditch effort, I decided to try a manual install. Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org. So.. Let me try this again with some people who may really know what's going on. I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar. Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site? I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in. I've got lots o linux experience, just none as it relates to this ROIP stuff. Thanks in advance, any suggestions welcome. Alan
I just connected a Sata dvd drive to my Intel Atom mini ITX MB and loaded acid on it. Once the install was complete I disconnected the sata DVD drive and rebooted. No problem from there on. I run that box as 4 nodes and no DVD /CD rom. Jon VA3RQ On 5/22/2012 11:43 AM, Ron wrote:
Alan, I'm running node 28174 <tel:28174> on an Atom processor in an Acer Aspire One booting from a USB stick. I disconnected the hard drives on another computer, used the ACID CD to install on the USB, then booted the Acer from the USB. Thanks to udev all the hardware changes were handled without issues. Ron KA7U
/Connected by DROID on Verizon Wireless/
-----Original message-----
*From: *Alan Adamson <adamson_alan@hotmail.com>* To: *App_rpt-users@ohnosec.org* Sent: *Tue, May 22, 2012 14:45:06 GMT+00:00* Subject: *[App_rpt-users] Where to start?
I finally got my IRLP node fully functional, now it's time to move on to allstar, etc.
BUT I'm totally stuck. I tried to install Xipar and it's builton such an old linux platform that it won't work on my current hardware (Atom based motherboard). so I decided to try the ACID install just to see where that gets me and I can't do that either - A)because I don't want to put a CD on my Atom board, and B) eventhoughI have a bootable usb stick with ACID on it, about half waythroughthe install it wants to go back to a cdrom to get a file :(. And to make matters worse, the dl.allstarlink.org site is MIA in the etherverse.
so as a last ditch effort, I decided to try a manual install... Well, good luck with that, I can't find any good information on doing it the hard way. And the one site that I did find needs a file again from dl.allstarlink.org.
So.... Let me try this again with some people who may really know what's going on.
I know I can get all my hardware up with a current debian install and some ALSA driver changes for the motherboard audio. From that, how can I install the software such that I can get on the allstar link network? I already have registration information from allstar.
Or as a fall back, does anyone have a copy of the files.tar.gz file that would normally reside on the dl.allstarlink.org site? Or know what happened to that site?
I know this is probably like trying to solder 0402 SMT parts with a 70W soldering torch, but I need some direction to get me headed in... I've got lots o linux experience, just none as it relates to this ROIP stuff.
Thanks in advance, any suggestions welcome.
Alan
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Alan Adamson -
Bob Brown - WØNQX -
Jon Rorke -
Ron -
Stephen - K1LNX