These are documented in the rpt.conf.sample file under [controlstates]: https://www.xelatec.com/viewvc/app_rpt/asterisk/trunk/configs/rpt.conf.sampl... You can also use the scheduler and macros to switch to different operating modes at different times ala cron. WA6ZFT Steve Mark Hagler wrote:

I see in the code there's two control op commands to affect the system state:

* 13 - Query System State * 14 - Change System State

Is there an example rpt.conf floating around that shows how to set up multiple system states that could be selected with this command?

Thanks,

Mark _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt