Actually you need to set the DSP squelch. Use radio tune rxsquelch to set the squelch. In ACID: AST_2249_XCN*CLI> radio tune rxsquelch Current Signal Strength is 741 Current Squelch setting is 501 If the setting is lower then you will hear squelch crash. Set the squelch above the measured level: AST_2249_XCN*CLI> radio tune rxsquelch 800 Changed Squelch setting to 800 AST_2249_XCN*CLI> radio tune rxsquelch Current Signal Strength is 749 Current Squelch setting is 800 AST_2249_XCN*CLI> Then do a "radio tune save" to save the setting. The squelch should now close very fast like the Micor squelch. It works very well. Jon VA3RQ On 10/4/2013 5:11 AM, Ken wrote:

You get a long tail when you are using CTCSS and COR and the COR is continuously on (indicating carrier present).

Asterisk operates only on the tone squelch, in that case.

Something is wrong with your COS (COR) signal or related configuration.

73

Ken

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users