I would like to setup a macro to connect to a node, but then have that same macro also disconnect that node if entered again (think toggle on/off).

I came up with an easy solution for this one, figured I'd post it to the group in case anyone else was interested. http://www.qsl.net/k0kn/ast_toggle 73 Kyle Yoksh K0KN Olathe, KS Allstar 2210-2219 --- Original Message --- I'm trying to set up a permanent connection to another node to link 2 repeaters at different sites together. My node has macros set up to allow easy connection to other area nodes ie: (Macro 13 = *33353296#) To make things easier for the users, I would like to use the "disconnect all" to disconnect any nodes they may connect to, while still leaving the permanent connection in place. It does not work that way unfortunately, as it drops ALL connections (as the name implies). So here are my questions: Can a "permanent" connection truly be made permanent? And/or I would like to setup a macro to connect to a node, but then have that same macro also disconnect that node if entered again (think toggle on/off). I'm thinking something similar to the rotating ID script I've seen around. Is this a plausible solution? What other ways could I accomplish this? Any help is greatly appreciated! Thank you! Steve KD8BIW 224.580- [110.9] Allstar Node 29912 Echolink Node 297683