Node stays keyed after disconnect
I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine. Running DIAL on RPi. Sincerely, boB - W5EVH
I have had this problem with dtmf commands executed over RF. If you release the PTT about 1 sec after issuing the last dtmf character it doesnt hang for me, but if i let go of the PTT immediatly after pushing the last dtmf it happens every time. On 9/22/2016 8:44 PM, Bob Roszkowski wrote:
I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine.
Running DIAL on RPi.
Sincerely,
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yes!! Just fixed in the new versio of app_rpt. Download the latest sources, build them, and it will be fixed. ________________________________ From: app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Bob Roszkowski <bob@w5evh.org> Sent: Thursday, September 22, 2016 8:44 PM To: app_rpt mailing list Subject: [App_rpt-users] Node stays keyed after disconnect I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine. Running DIAL on RPi. Sincerely, boB - W5EVH
Also fixed in the Release Candidates. How to for current DIAL. # Get Asterisk cd /usr/src/astsrc-1.4.23-pre svn update http://svn.ohnosec.org/svn/projects/allstar/astsrc-1.4.23-pre/trunk astsrc-1.4.23-pre # grab the svn version number and put it where asterisk/Makefile expects it. cd /usr/src/astsrc-1.4.23-pre svnversion >asterisk/.version Apply updates cd /usr/src/astsrc-1.4.23-pre/asterisk make make install restart Asterisk 73, Steve N4IRS On 09/23/2016 06:41 AM, Jim Duuuude wrote:
Yes!!
Just fixed in the new versio of app_rpt.
Download the latest sources, build them, and it will be fixed.
------------------------------------------------------------------------ *From:* app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Bob Roszkowski <bob@w5evh.org> *Sent:* Thursday, September 22, 2016 8:44 PM *To:* app_rpt mailing list *Subject:* [App_rpt-users] Node stays keyed after disconnect I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine.
Running DIAL on RPi.
Sincerely,
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Resend for corrections Also fixed in the Release Candidates. How to for current DIAL. # Get Asterisk cd /usr/src/astsrc-1.4.23-pre svn update . # grab the svn version number and put it where asterisk/Makefile expects it. cd /usr/src/astsrc-1.4.23-pre svnversion >asterisk/.version Apply updates cd /usr/src/astsrc-1.4.23-pre/asterisk make make install restart Asterisk 73, Steve N4IRS On 09/23/2016 06:41 AM, Jim Duuuude wrote:
Yes!!
Just fixed in the new versio of app_rpt.
Download the latest sources, build them, and it will be fixed.
------------------------------------------------------------------------ *From:* app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Bob Roszkowski <bob@w5evh.org> *Sent:* Thursday, September 22, 2016 8:44 PM *To:* app_rpt mailing list *Subject:* [App_rpt-users] Node stays keyed after disconnect I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine.
Running DIAL on RPi.
Sincerely,
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
my pi3 is running Arch Linux. Will the patch be compatable as well? Gregory On 9/23/2016 10:24 AM, Steve Zingman wrote:
Resend for corrections
Also fixed in the Release Candidates. How to for current DIAL.
# Get Asterisk cd /usr/src/astsrc-1.4.23-pre svn update .
# grab the svn version number and put it where asterisk/Makefile expects it. cd /usr/src/astsrc-1.4.23-pre svnversion >asterisk/.version
Apply updates cd /usr/src/astsrc-1.4.23-pre/asterisk make make install
restart Asterisk
73, Steve N4IRS
On 09/23/2016 06:41 AM, Jim Duuuude wrote:
Yes!!
Just fixed in the new versio of app_rpt.
Download the latest sources, build them, and it will be fixed.
------------------------------------------------------------------------ *From:* app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Bob Roszkowski <bob@w5evh.org> *Sent:* Thursday, September 22, 2016 8:44 PM *To:* app_rpt mailing list *Subject:* [App_rpt-users] Node stays keyed after disconnect I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine.
Running DIAL on RPi.
Sincerely,
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Sorry, Don't know. No idea how or where asterisk is configured on your system. 73, Steve N4IRS On 09/23/2016 08:41 PM, Gregory wrote:
my pi3 is running Arch Linux. Will the patch be compatable as well?
Gregory
On 9/23/2016 10:24 AM, Steve Zingman wrote:
Resend for corrections
Also fixed in the Release Candidates. How to for current DIAL.
# Get Asterisk cd /usr/src/astsrc-1.4.23-pre svn update .
# grab the svn version number and put it where asterisk/Makefile expects it. cd /usr/src/astsrc-1.4.23-pre svnversion >asterisk/.version
Apply updates cd /usr/src/astsrc-1.4.23-pre/asterisk make make install
restart Asterisk
73, Steve N4IRS
On 09/23/2016 06:41 AM, Jim Duuuude wrote:
Yes!!
Just fixed in the new versio of app_rpt.
Download the latest sources, build them, and it will be fixed.
------------------------------------------------------------------------ *From:* app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ohnosec.org> on behalf of Bob Roszkowski <bob@w5evh.org> *Sent:* Thursday, September 22, 2016 8:44 PM *To:* app_rpt mailing list *Subject:* [App_rpt-users] Node stays keyed after disconnect I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine.
Running DIAL on RPi.
Sincerely,
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Thanks Duuuude! Works like a champ. Sincerely, boB - W5EVH On Fri, Sep 23, 2016 at 5:41 AM, Jim Duuuude <telesistant@hotmail.com> wrote:
Yes!!
Just fixed in the new versio of app_rpt.
Download the latest sources, build them, and it will be fixed.
------------------------------ *From:* app_rpt-users-bounces@ohnosec.org <app_rpt-users-bounces@ ohnosec.org> on behalf of Bob Roszkowski <bob@w5evh.org> *Sent:* Thursday, September 22, 2016 8:44 PM *To:* app_rpt mailing list *Subject:* [App_rpt-users] Node stays keyed after disconnect
I was wondering if anyone else was having an issue with a node staying keyed after disconnecting from another node. If I key up again, the node will give courtesy tone then drop. If I connect through CLI, it works fine.
Running DIAL on RPi.
Sincerely,
boB - W5EVH
participants (4)
-
Bob Roszkowski -
Gregory -
Jim Duuuude -
Steve Zingman