Hello, name is Larry here 28094 n3vsi. Looking for some help in getting my allstar node up and running. 1. Have the acid cd already loaded. everything loaded find. port 222 forward in router 2. have the URI 3. have radio and cable for URI 4. have node # 28094 5. everything is hooked up and waiting Thanks for any help. Larry
That is a pretty broad question. Can you say what is it you WANT to do? Your node can probably already be used as a "hub" node. This is a node which has no Radio hardware associated with it whatsoever. For that you need to have port 4569 through the router. Once you have done that, other nodes and web transceiver users can connect to your node. I tried just now and it failed. So I suppose you are missing the router setup. Have you configured the system? (in your case I suppose simplex node for half duplex operation). You do that from the "portal" or manually. The portal has a server "setup wizard" that lets you configure everything you need. Have you done that? After you have done that (and connected your radio) you need to set the audio levels. See: https://allstarlink.org/usbradio.html Then you get your hands on *another* radio (or HT) and talk to your node. It will accept DTMF commands to read out information on the air or to connect your node to some other node. Then you are in business - you can work the world from your HT (among other things.) 73 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Larry Sent: Wednesday, January 18, 2012 6:50 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Setup Hello, name is Larry here 28094 n3vsi. Looking for some help in getting my allstar node up and running. 1. Have the acid cd already loaded. everything loaded find. port 222 forward in router 2. have the URI 3. have radio and cable for URI 4. have node # 28094 5. everything is hooked up and waiting Thanks for any help. Larry
The easiest way to start is to set up your node configuration on the Allstar site. First thing you do is login to https://allstarlink.org and go into account setting and make your profile a system operator. That will open up a whole bunch of new options on the web site which you can use to configure your server and node. Go thru all the options. Note that some options will get grayed out after changing one thing. You have to back out and come back in to the settings and you'll be able to change those things. Give that a try and let us know how you do. Then we'll figure out how to download the portal configuration to your computer. Normally the portal stuff is done first the you answer in the affirmative the question about downloading the confirmation during the ACID install. But I'm sure there is some way to download it after the fact. -- Tim :wq On Jan 18, 2012, at 3:49 PM, Larry wrote:
Hello, name is Larry here 28094 n3vsi. Looking for some help in getting my allstar node up and running.
1. Have the acid cd already loaded. everything loaded find. port 222 forward in router 2. have the URI 3. have radio and cable for URI 4. have node # 28094 5. everything is hooked up and waiting
Thanks for any help.
Larry _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Ken -
Larry -
Tim Sawyer