I would suggest full paths to all calls in the script. Never assume the path exists. Mark Kc5eve Sent from my iPhone Please excuse brevity as well as Otto core-wrecked errors missed.

On Oct 24, 2018, at 2:26 PM, edbathgate@zoominternet.net wrote:

I should clarify on the software version I am running on X86. AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. I get version "0.327" by rpt fun 29019 *723, = status,3 ; give software version (global)

I tried same time stamp script on my 2nd node,29966, but it has no USB-audio module, it goes through the motions via command line. 29966 WILL write the time stamp to the file tr.dat from the Asterisk CLI> using !/path/script. But I get the same behavior from the DTMF command called through rpt fun defined in rpt.conf. Both nodes installed on similar hardware from the same USB install thumb drive.

Ideas? Suggestions?

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.