Is there a command to check which CODEC my allstar system is using? Thanks... __________ Information from ESET NOD32 Antivirus, version of virus signature database 9382 (20140204) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
Look at iax.conf "allow=" statements, e.g. allow= ulaw allow=adpcm allow=g726aa12 allow=gsm you can include them all. Bob kk6ecm _____ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of KJ6KO Sent: Tuesday, February 04, 2014 3:00 PM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] CODEC inquiry? Is there a command to check which CODEC my allstar system is using? Thanks... __________ Information from ESET NOD32 Antivirus, version of virus signature database 9382 (20140204) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
Is there a command to check which CODEC my allstar system is using?
Thanks...
Asterisk will use whatever codecs you specify in iax.conf (or iax_rpt_custom.conf depending on what flavor you are using). Within [radio], one typically begins with a "disallow=all" to override any system-wide defaults that may exist, followed by one or more "allow=xxxx" where xxx is the codec (e.g. ulaw, alaw, gsm, etc.). As far as what codec is currently being used for a given channel (a "link" to another server/node is made via an IAX2 channel), use "iax2 show channels" from the Asterisk CLI. --- Jeff WN3A
iax2 show channels -- Tim :wq On Feb 4, 2014, at 3:00 PM, KJ6KO <kj6ko@innercite.com> wrote:
Is there a command to check which CODEC my allstar system is using?
Thanks...
__________ Information from ESET NOD32 Antivirus, version of virus signature database 9382 (20140204) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bob -
Jeff DePolo -
KJ6KO -
Tim Sawyer