Courtesy tones enabled / disabled COP command?
Merry Christmas / Happy Holidays to everyone, I'm wondering if COP commands exist to enable/disable courtesy tones? I'd like to be able to set one controlstate for courtesy tones, and one without. Is this possible? Thanks. 73 Kyle K0KN
No COP commands exist for this! Matt Roberts Phone: 386-679-1986 n9gmr@me.com Sent from my iPhone On Dec 25, 2012, at 10:27 PM, K&R Yoksh <yokshs@gmail.com> wrote:
Merry Christmas / Happy Holidays to everyone,
I'm wondering if COP commands exist to enable/disable courtesy tones?
I'd like to be able to set one controlstate for courtesy tones, and one without.
Is this possible?
Thanks. 73
Kyle K0KN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Just use the rpt.conf shuffle. I have a couple configurations called by scripts. They change all kinds of things, courtesy tones, tail length, ID's, with an asterisk -rx "rot reload" after moving files around. -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY On Dec 25, 2012, at 10:41 PM, Matt Roberts <n9gmr@me.com> wrote:
No COP commands exist for this!
Matt Roberts Phone: 386-679-1986 n9gmr@me.com
Sent from my iPhone
On Dec 25, 2012, at 10:27 PM, K&R Yoksh <yokshs@gmail.com> wrote:
Merry Christmas / Happy Holidays to everyone,
I'm wondering if COP commands exist to enable/disable courtesy tones?
I'd like to be able to set one controlstate for courtesy tones, and one without.
Is this possible?
Thanks. 73
Kyle K0KN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On 12/25/2012 10:41 PM, Matt Roberts wrote:
No COP commands exist for this!
So? Andrew Jackson once opined that it's a poor mind that can't figure more than one way to spell a word...same applies here. Creativity is called for; if it doesn't exist...well, how about figuring out either via scripting, bit banging, or other functionality how to accomplish the equivalent through other means? Not every possible combination can be predicted by a software author. That's why capabilities are provided to 'roll your own' and it's running on the OS platform it is running on: if it's not in the application, there is some way YOU can, using the rich set of tools that are freely provided, do what needs be done. We can't expect Jim to do everything.
participants (4)
-
Bryan D. Boyle -
Buddy Brannan -
K&R Yoksh -
Matt Roberts