for some reason my node 2091 is getting stuck and will not queue an ID. if I "restart now" asterisk, it will queue for ID 1 time.. same with rpt reload ID happens only once then its permanently stuck in CLEAN. anyone else seen this. I compared the rpt.conf between my two nodes and they are identical - callsigns/node#. Don _________________________________________________________________ Keep your kids safer online with Windows Live Family Safety. http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_fam...
Don, That's a strange problem. Can you try the default rpt.conf to see if it does the same thing? What version of app_rpt are you running? Steve WA6ZFT Don Russell wrote:
for some reason my node 2091 is getting stuck and will not queue an ID.
if I "restart now" asterisk, it will queue for ID 1 time.. same with rpt reload
ID happens only once then its permanently stuck in CLEAN.
anyone else seen this.
I compared the rpt.conf between my two nodes and they are identical - callsigns/node#.
Don
_________________________________________________________________ Keep your kids safer online with Windows Live Family Safety. http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_fam...
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
[2091] rxchannel = radio/usb duplex = 2 ; (Optional) set duplex operating mode functions = functions ; DTMF function list telemetry = telemetry ; point to telemetry stanza for this node (see below) tonezone = us ; use US tones (default) context = default ; dialing context for phone callerid = "WX9MCS" <2091> ; Callerid for phone calls idrecording = wx9mcs ; id recording accountcode = RADIO ; account code (optional) funcchar = * ; function lead-in character (defaults to '*') endchar = # ; command mode end character (defaults to '#') totime = 500000 ; transmit time-out time (in ms) (optional) idtalkover = |iwx9mcs/r ; Talkover ID (optional) default is none unlinkedct = ct1 ; unlinked courtesy tone (optional) default is none idtime = 590000 ; id interval time (in ms) (optional) politeid = 20000 ; time in milliseconds before ID timer hangtime = 0 ; squelch tail hang time (in I have no ID going on at all now. if I do a *80 I do get the ID. its just not id'ing at all by itself. constant clean state. I'm going to have to pull it offline until I can solve this. can't find anything at all wrong in the conf. been going over line by line and comparing to 2090. rpt restart will clear whatever is sticking for 1 ID only. Don
Date: Sun, 27 Jul 2008 08:20:59 -0700 From: hwstar@rodgers.sdcoxmail.com To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] repeater ID
Don,
That's a strange problem. Can you try the default rpt.conf to see if it does the same thing? What version of app_rpt are you running?
Steve WA6ZFT
Don Russell wrote:
for some reason my node 2091 is getting stuck and will not queue an ID.
if I "restart now" asterisk, it will queue for ID 1 time.. same with rpt reload
ID happens only once then its permanently stuck in CLEAN.
anyone else seen this.
I compared the rpt.conf between my two nodes and they are identical - callsigns/node#.
Don
_________________________________________________________________ Keep your kids safer online with Windows Live Family Safety. http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_fam...
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_________________________________________________________________ Use video conversation to talk face-to-face with Windows Live Messenger. http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL...
Don, Why is your hang time set to 0? FWIW: Here's my config for comparison against yours.
[2010] ; Name of First Repeater
rxchannel = Zap/1 ; Rx audio/signalling channel ;duplex=0 ; Duplex mode ;rxnotch=1065,40 ; controlstates=controlstates ; system control state list scheduler=schedule; ; scheduler entries functions=functions ; Repeater Function Table phone_functions=functions ; Repeater Function Table link_functions=link-functions ; Link Function Table telemetry=telemetry ; Telemetry descriptions startup_macro=*9532011*9532000*89 ; Startup macro wait_times=wait-times ; Wait times ;archivedir = /var/lib/asterisk/monitor ; directory where recordings go context = autopatch ; dialing context for phone callerid = "WA6ZFT Repeater" <619835xxxx> ; callerid for phone calls idrecording = /etc/asterisk/wa6zft-rpt ; id recording accountcode=RADIO ; account code (optional) hangtime=1000 ; squelch tail hang time (in ms) (option althangtime=4000 ; longer squelch tail totime=170000 ; transmit time-out time (in ms) (option totime=10000 idtime=540000 ; id interval time (in ms) (optional) ; The default values for hangtime, time-out time, and id interval time are ; 5 seconds (5000 ms), 3 minutes (180000 ms), and 5 minutes (300000 ms) ; respectively
politeid=30000 ; time in milliseconds before ID timer
; expires to try and ID in the tail. ; (optional, default is 30000). idtalkover=|iwa6zft/r ; Talkover ID (optional) default is none unlinkedct=ct2 ; unlinked courtesy tone (optional) defa remotect=ct3 ;tailmessagetime=2000 ;tailsquashedtime=1000 ;tailmessagelist=vm-and,vm-and,vm-and parrot=0 ; Parrot mode 0 = disabled, 1 = forced ( parrottime=1000 ; Parrot audio sample time in MS nodenames=rpt/nodenames ; Directory with symbolic node names statpost_program=/bin/wget,-q,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
Steve, WA6ZFT Don Russell wrote:
[2091] rxchannel = radio/usb duplex = 2 ; (Optional) set duplex operating mode functions = functions ; DTMF function list telemetry = telemetry ; point to telemetry stanza for this node (see below) tonezone = us ; use US tones (default) context = default ; dialing context for phone callerid = "WX9MCS" <2091> ; Callerid for phone calls idrecording = wx9mcs ; id recording accountcode = RADIO ; account code (optional) funcchar = * ; function lead-in character (defaults to '*') endchar = # ; command mode end character (defaults to '#') totime = 500000 ; transmit time-out time (in ms) (optional) idtalkover = |iwx9mcs/r ; Talkover ID (optional) default is none unlinkedct = ct1 ; unlinked courtesy tone (optional) default is none idtime = 590000 ; id interval time (in ms) (optional) politeid = 20000 ; time in milliseconds before ID timer hangtime = 0 ; squelch tail hang time (in
I have no ID going on at all now. if I do a *80 I do get the ID. its just not id'ing at all by itself. constant clean state.
I'm going to have to pull it offline until I can solve this. can't find anything at all wrong in the conf. been going over line by line and comparing to 2090.
rpt restart will clear whatever is sticking for 1 ID only.
Don
Date: Sun, 27 Jul 2008 08:20:59 -0700 From: hwstar@rodgers.sdcoxmail.com To: app_rpt@lists.illiana.net Subject: Re: [App_rpt] repeater ID
Don,
That's a strange problem. Can you try the default rpt.conf to see if it does the same thing? What version of app_rpt are you running?
Steve WA6ZFT
Don Russell wrote:
for some reason my node 2091 is getting stuck and will not queue an ID.
if I "restart now" asterisk, it will queue for ID 1 time.. same with rpt reload
ID happens only once then its permanently stuck in CLEAN.
anyone else seen this.
I compared the rpt.conf between my two nodes and they are identical - callsigns/node#.
Don
_________________________________________________________________ Keep your kids safer online with Windows Live Family Safety. http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_fam...
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_________________________________________________________________ Use video conversation to talk face-to-face with Windows Live Messenger. http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL...
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
participants (2)
-
Don Russell -
Stephen Rodgers