I don't think this is what Randy wanted. We wanted to have a totally different courtesy tones fromm just one remote node on the receive. Say node 1234 was remote to the local node and other remote nodes were connected in. He would want 1234 to have a different tone than anything else. Corey N3FE -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Agee Sent: Sunday, June 26, 2011 1:25 PM To: Randy Ballard; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Courtesy Tones Sure, just define a different tone such as ct1 or ct2 or ct3 for the other node. You can also edit the actual tone values that you want in the rpt.conf file. For example, I like to use a dial tone, which reads: remotetx=|t(350,440,400,3500) So when the node is linked and a local user unkeys they hear the dial tone, which is two tones mixed together at once ...the first two values of the line ... 350 Hz and 440 Hz, for 400 milliseconds, at a level of 3500. N5ZUA ----- Original Message ----- From: Randy Ballard To: app_rpt-users@ohnosec.org Sent: Sunday, June 26, 2011 11:45 AM Subject: [App_rpt-users] Courtesy Tones Hi I was wondering if there is a way to have a different ctone for different nodes like node 27365=ct2 and if there is how is id defined thanks -- Randy KB3HJC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=D1B5722E3.A7644