Steve, nothing is showing in the messages file other than what's below. The xpmr has been happening for a few weeks and I just haven't had a chance to ask about it yet. [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init 46101 [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init 46100 _tune_usb_46100.conf not found, using default parameters. [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxlpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxhpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txlpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txhpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: John Rudolph Amateur Radio Op N2YP Unadilla,NY
Step 1: Check the log for errors: it is in /var/log/asterisk the filename is messages
Steve n4IRS
On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I went to add a puesdo/dahdi hub and just made a additions to rpt.conf and iax.conf, and went and rebooted Asterisk and or the whole system and even though I love undone the "new" node the system is broke. My URI'S no longer get a heartbeat but show via lsusb, I can't access Asterisk CLI- get "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
radio-tune-menu - get "Error parsing device parameters", nodes no longer register with ASL, allmon2 can't access Asterisk manager, and my EchoLink node shows active but you can't access it. After multiple
reboots I did try apt get update and upgrade with no success. Dahdi and crc_ccitt show running and nothing shows in the asterisk log other than it starting the nodes.
What I don't understand is that I did nothing at all other than add a
stanza for another node and uncomment that node number in iax.conf and restart. If someone could walk me through trouble shooting this I would appreciate it so I can learn what went wrong. John Rudolph Amateur Radio Op N2YP Unadilla,NY
_______________________________________________
Message: 3 Date: Sat, 28 Apr 2018 20:58:40 -0700 From: Tim Sawyer <tisawyer@gmail.com> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Errors Message-ID: <CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ@mail.gmail.com> Content-Type: text/plain; charset="utf-8"
You probably fat fingered something. It happens to all of us. Start Asterisk in the non-deamon mode by doing
asterisk -fnvvv
at the linux prompt and watch for errors. Press control-c to exit. Fix error. Repeat until it starts clean.
and asterisk -r does not work? if not, run asterisk in the foreground asterisk -vcd And paste the complete output. On 04/29/2018 04:27 PM, John Rudolph- N2YP wrote:
Steve, nothing is showing in the messages file other than what's below. The xpmr has been happening for a few weeks and I just haven't had a chance to ask about it yet.
[Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init 46101 [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init 46100 _tune_usb_46100.conf not found, using default parameters. [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxlpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxhpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txlpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txhpf: 0 [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: John Rudolph Amateur Radio Op N2YP Unadilla,NY
Step 1: Check the log for errors: it is in /var/log/asterisk the filename is messages
Steve n4IRS
On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I went to add a puesdo/dahdi hub and just made a additions to rpt.conf and iax.conf, and went and rebooted Asterisk and or the whole system and even though I love undone the "new" node the system is broke. My URI'S no longer get a heartbeat but show via lsusb, I can't access Asterisk CLI- get "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access radio-tune-menu - get "Error parsing device parameters", nodes no longer register with ASL, allmon2 can't access Asterisk manager, and my EchoLink node shows active but you can't access it. After multiple reboots I did try apt get update and upgrade with no success. Dahdi and crc_ccitt show running and nothing shows in the asterisk log other than it starting the nodes.
What I don't understand is that I did nothing at all other than add a stanza for another node and uncomment that node number in iax.conf and restart. If someone could walk me through trouble shooting this I would appreciate it so I can learn what went wrong. John Rudolph Amateur Radio Op N2YP Unadilla,NY
_______________________________________________ Message: 3 Date: Sat, 28 Apr 2018 20:58:40 -0700 From: Tim Sawyer <tisawyer@gmail.com> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Errors Message-ID: <CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ@mail.gmail.com> Content-Type: text/plain; charset="utf-8"
You probably fat fingered something. It happens to all of us. Start Asterisk in the non-deamon mode by doing
asterisk -fnvvv
at the linux prompt and watch for errors. Press control-c to exit. Fix error. Repeat until it starts clean.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
John Rudolph- N2YP -
Steve Zingman