To find the password for your node go to www.allstarlink.org and sign in. There will be a tab on there that lets you view the details of your node. On Sat, Jan 12, 2019, 4:00 AM <app_rpt-users-request@lists.allstarlink.org wrote:

Send App_rpt-users mailing list submissions to app_rpt-users@lists.allstarlink.org

To subscribe or unsubscribe via the World Wide Web, visit

http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@lists.allstarlink.org

You can reach the person managing the list at app_rpt-users-owner@lists.allstarlink.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics:

1. Node 47788 (AD2TM) 2. Re: Node 47788 (Bryan St Clair)

---------- Forwarded message ---------- From: AD2TM <ka2myd@frontiernet.net> To: app_rpt-users@lists.allstarlink.org Cc: Bcc: Date: Sat, 12 Jan 2019 00:36:17 +0000 Subject: [App_rpt-users] Node 47788 Hello All; For the past year at different time I have been trying to get an allstar node up and running. I have had various amounts of success. I too wish that there was a detailed step by step setup instruction list for us newbies, or a script that would walk a new user through the COMPLETE setup. I have found the documentation very frustrating to follow. Enough complaining.

I have many questions, but will only as a couple: 1.) What is the CLI and what is it used for? 2.) I know my node, #47788 is registered, but no information can be found. Where how do I fix th

Can someone try to connect and let me know their results? There is a radio connected and on, but on a simplex frequency. 73 Tom AD2TM

---------- Forwarded message ---------- From: Bryan St Clair <bryan@k6cbr.us> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Cc: Bcc: Date: Fri, 11 Jan 2019 16:39:39 -0800 Subject: Re: [App_rpt-users] Node 47788 I see you online and registered. I, however, was not able to connect to you. Perhaps port forwarding or config of the port is wrong.

CLI is where you can access the node via SSH. Command Line Interface

I can jump on TeamViewer if you have it, to help you out if ya want. Just email me directly off the list for the info.

On Fri, Jan 11, 2019 at 4:36 PM AD2TM <ka2myd@frontiernet.net> wrote:

...

Hello All; For the past year at different time I have been trying to get an allstar node up and running. I have had various amounts of success. I too wish that there was a detailed step by step setup instruction list for us newbies, or a script that would walk a new user through the COMPLETE setup. I have found the documentation very frustrating to follow. Enough complaining.

I have many questions, but will only as a couple: 1.) What is the CLI and what is it used for? 2.) I know my node, #47788 is registered, but no information can be found. Where how do I fix th

Can someone try to connect and let me know their results? There is a radio connected and on, but on a simplex frequency. 73 Tom AD2TM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- Bryan K6CBR bryan@k6cbr.us Allstar Base: 43918, 43991 Allstar Hubs: 43919, 47036, 47061(Testing)

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users