Jim, Good to hear everything is going well. What hardware are you running on? 73, Steve N4IRS On 11/08/2015 04:47 AM, 41.2 Jim wrote:

FYI: I've installed the new DIAL, Debian version software, upgrading from the ACID install for Allstarlink and I could not be any happier.... I found the install so much easier to install and could say it "holds your hand" all the way through, and any mistakes can easily be restarted again with a simple command,(portal, network ect..) . At least I found it a lot more simple than the ACID install. It has been rock solid since the install, about 3 weeks now, and is faster in every way, the reboot is only a 10 seconds until you are back to the log in, as my ACID install would hang at the "sendmail" part of the re-load. I am a Windows guy and I know almost nothing about Linux, this new software was "Cake" to install

I have now started to help friends to upgrade to the new DIAL software, as I said it's very easy change. Thought you all should know

Thanks to all that was involved in this new software

Jim Frederick KF6QBW

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic