As a guess check /etc/asterisk/modules.conf and make sure chan_echolink is set to load and not noload, it may not be loading the echolink channel driver Sent from my iPhone

On Feb 28, 2018, at 12:25 PM, W2rjr <w2rjr@aim.com> wrote:

73 Ray, W2RJR

From: W2rjr <w2rjr@aim.com> Date: Wednesday, February 28, 2018 Subject: Echolink on Allstar To: app_rpt-users <app_rpt-users@lists.allstarlink.org>

Hello,

I have an Allstar node on a Raspberry Pi using a sound fob with a modified bofeng 888 ht. Allstar works fine just cant seem to get echolink to work. I have edited the echolink.conf in /etc/asterisk. I have the ports forwarded for the Pi's ip address. Am i missing something ? I have it working on my repeater which runs Dial and copied the file from there. I just changed the Call, the node number and pw and still does not work. Any help would be greatly appreciated.

73 Ray, W2RJR

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.