Hi, I have just followed Jim's instructions to change a node's port number. 1. Visit the portal and change the number there. 2. Edited IAX.Conf and restarted. This is a test node that is co-sited with node 2481 on port 4569 - hence the need for another port. When I attempted to connect to the node (2484) from the web transceiver, the call failed. Looking at the console for 2484 showed no incoming activity, it turned out that the call was being directed to node 2481 on port 4569; the Web Transceiver was using the old port number. I attempted to connect to 2484 from another node and that also failed. It transpired that rpt_extnodes had now got two entries for 2484. Here's an extract from the file: 2480=radio@87.254.94.29:4568/2480,87.254.94.29 2481=radio@89.107.6.110:4569/2481,89.107.6.110 2482=radio@87.254.94.29:4569/2482,87.254.94.29 2483=radio@217.28.14.128:4569/2483,217.28.14.128 2484=radio@89.107.6.110:4569/2484,89.107.6.110 2484=radio@89.107.6.110:4568/2484,89.107.6.110 2490=radio@68.227.84.117:4569/2490,68.227.84.117 This extract was taken more than an hour after making the portal changes. Is this a problem with the node list updates, or have I missed something? Incidentally, I manually corrected the list and the call succeeded straight off the bat. Another, somewhat unrelated thing.... I instructed the portal to download the configuration to the server - it didn't! What am I missing here? I have run the scripts on the support page, which did the first-time download, but nothing since. David GD4HOZ