Lu, Did you add the statpost lines in the second node stanza? statpost_program = /usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url = http://stats.allstarlink.org/uhandler.php ; Status updates On 1/16/2018 3:55 PM, Lu V wrote:

I need a refresher. If I add a second URI / node # to an existing node, do I have to put the second node on another port other than the default 4569?  Or can the both be on the same port as long as they are on the same box?  Also, I see that the node 27877 is registered and active when I perform an IAX2 show registry but when I look on the status page (stats.allstarlinkg.org <http://stats.allstarlinkg.org/>) it does not show up. I have it 24 hours and it still is not showing up.

So to summarize,  the current node that has been and still is working is 27870,  and adding 27877 to the same box, I can’t seem to get it to show up on the status page but yet it shows registered on the same box.

Any ideas?

Lu Vencl KA4EPS

Sent from my iPhone, Lu Vencl

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.