RTCM bandwidth/ data throughput requirements?
Good Morning,Group! I am curious as to the bandwidth/data throughput requirements of the Allstar RTCM. I wish to use a dedicated microwave link that will permit up to 20Mbps. Would that work for the RTCM? Thank you! -Paul
that is more than enough, I have a link with just 2mbps and it works fine. I think it would work okay with under 1mbps, but I have not tried it with less than 2mbps On Tue, Oct 15, 2013 at 12:31 AM, Paul Schlacter < paulschlaterradio@gmail.com> wrote:
Good Morning,Group! I am curious as to the bandwidth/data throughput requirements of the Allstar RTCM. I wish to use a dedicated microwave link that will permit up to 20Mbps. Would that work for the RTCM? Thank you! -Paul
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
- assuming ulaw: The RTCM will require approx. 80 kbps of bandwidth. Thus, a 20 Mbps pipe will accommodate (20x10e6/80x10e3) = 250 RTCMs! In actuality with network jitter, overhead, etc., it would probably be somewhat less than that. But I bet it could comfortably handle 100 of them without much effort! --- Robert Pectol rob@pectol.com (671)686-3079 On 2013-10-15 15:31, Paul Schlacter wrote:
Good Morning,Group! I am curious as to the bandwidth/data throughput requirements of the Allstar RTCM. I wish to use a dedicated microwave link that will permit up to 20Mbps. Would that work for the RTCM? Thank you! -Paul
participants (3)
-
Chuck Henderson -
Paul Schlacter -
Robert Pectol