Greetings, Several months ago there were a few people on the list that were interested in the Kenwood TMG-707A radio to DMK URO interface boards for agile remote base use. We have made a "limited quantity" run of (bare-boards) for use with the Kenwood TMG-707A radio to the DMK URI interface board. These boards are used as an interface between your all-star computer with a DB9 serial port and your Kenwood TMG-707A radio to remotely control your radio. The board plugs directly into the end of the URI with the 25 pin connector, and a serial port on your PC device. These boards use all standard thru-hole parts that takes very little specialized skills to construct. You can go to this website to see what the boards look like. http://ohnosec.org/drupal/node/162 I also have an updated bill of material parts list from digikey for the new boards. If you are interested in purchasing these boards please contact me off the list. (ke6pcv at gmail dot com) First come first serve as I only have small quantity! 73 Marshall - ke6pcv