Try "radio key" and "radio unkey" for the chan_usb channel driver. "susb key" and "susb unkey" for simpleusb channel driver 73, Steve N4IRS On 4/28/2016 12:00 PM, Skyler Fennell wrote:

Is there a command I can run to tell Allstar that my URI has received a COR or CTCSS signal without actually putting a voltage across it?

I am working on scripts to get the GPIO pins in the raspberry pi to work as COR, CTCSS, and PTT using the wiringPi program. I have PTT working by following K0KN's TXled script, but don't know how to tell AllStar about COR.

73, Skyler KDØWHB _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic