Hello all new to the list and app_rpt with asterisk in general. My question is if the beagle board/LOX combo is powerful enough to also be the radio server for the RTCM's. My first 2 LOX/Beagleboard combo's should up a few days ago.. Just sat down and hooked up my first radio to it about 24 hours ago and it's really slick how it's just working to the point that I am thinking of replacing the arcom rc210 I have on my UHF machine after i keep working and testing this more.. I want to not only run the RTCM's from the beagle board that will be located at the main site but have the 2 radio ports on the LOX's be used as remote bases to the RTCM. As from what I am reading about the RTCM's they need a app_rpt server to show up as a radio port for ID's n Such.. My current UHF Site1 is a motorola purc 5000 with a UHF link radio towards a friends site. If the RTCM/Beagleboard combo's work I will be installing a second purc about 10 miles away on another mountain ridge site so will want the voted RX audio as well as the simulcast to work out the "remote" link ports on the LOX. A third site is planned to the west about 18 miles away but won't come up till the microwave path is installed direct to it.. This RTCM came out at just the right time as i have a stack of 900mhz maxtracs and a spectra tac voter that i was about it install for remote RX's. -- Fredric Moses - W8FSM - WQOG498 fred@moses.bz
I dont think running 1 instance of chan_voter with a few (10 or so) clients is even going to make a noticeable difference on a BeagleBoard. JIM WB6NIL
Date: Sat, 24 Dec 2011 03:12:16 -0500 From: fred@moses.bz To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM + LOX/Beagle Board Setup
Hello all new to the list and app_rpt with asterisk in general. My question is if the beagle board/LOX combo is powerful enough to also be the radio server for the RTCM's. My first 2 LOX/Beagleboard combo's should up a few days ago.. Just sat down and hooked up my first radio to it about 24 hours ago and it's really slick how it's just working to the point that I am thinking of replacing the arcom rc210 I have on my UHF machine after i keep working and testing this more.. I want to not only run the RTCM's from the beagle board that will be located at the main site but have the 2 radio ports on the LOX's be used as remote bases to the RTCM. As from what I am reading about the RTCM's they need a app_rpt server to show up as a radio port for ID's n Such..
My current UHF Site1 is a motorola purc 5000 with a UHF link radio towards a friends site. If the RTCM/Beagleboard combo's work I will be installing a second purc about 10 miles away on another mountain ridge site so will want the voted RX audio as well as the simulcast to work out the "remote" link ports on the LOX. A third site is planned to the west about 18 miles away but won't come up till the microwave path is installed direct to it..
This RTCM came out at just the right time as i have a stack of 900mhz maxtracs and a spectra tac voter that i was about it install for remote RX's.
-- Fredric Moses - W8FSM - WQOG498 fred@moses.bz _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Fredric Moses -
Jim Duuuude