Using getsrc in limey yo're directed by wget to http://limeylinux.org/downloads/astsrc-vers-1.0.6.tar.gz That redirects to: http://stats.allstarlink.org/limeylinuxdownloads/astsrc-vers-1.0.6.tar.gz That's missing a "/" between the x and d , then it works. Failed output shown below: --2011-03-14 22:07:37-- http://limeylinux.org/downloads/astsrc- vers-1.0.6.tar.gz Resolving limeylinux.org... 209.159.155.200 Connecting to limeylinux.org|209.159.155.200|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://stats.allstarlink.org/limeylinuxdownloads/astsrc- vers-1.0.6.tar.gz [following] --2011-03-14 22:07:41-- http://stats.allstarlink.org/limeylinuxdownloads/astsrc-vers-1.0.6.tar.gz Anybody know how to have the kernel recognize the cf as hda rather than sda? I have a "pre-built" D945 image, and exact same kernel version I made, mine has the CF as scsi, yours shows it as hda. Mine also doesn't show mounts usinf "df"...can't figure that out. Also, in the Makefile, "mount /mnt/cf" does nothing Also, with all of eth broken URL's getting packages for buildroot, I actually downloaded and made a tgz file of them all. Including added wireless tools, as my whole goal was to make this work with a RTL8187 USB wireless ethernet adapter. Any LL users out there can get me pointed the right way? I can start modifying scripts and Makefiles, but something tells me I'm just doing something wrong. Help!! GeorgeC W2DB 2360