Hi Mars, Sorry for the delay and thanks for the reply. I thought it may have been a design feature....! I will start debugging it.... regards Anthony, VK2ACP On Thu, Mar 29, 2012 at 3:47 AM, ALERTradio ERC | N0PCO <n0pco@alertradio.net> wrote:

Hello Anthony,  here is a link from VoIP-Info that should help some (check into inband settings that is mentioned):

http://www.voip-info.org/wiki/view/Asterisk+DTMF

The system that I have here, is working with a separate PBX (that handles phone / vmail duties) and RF Gateway (handles radio and paging duties). The only time everything was on one server was when we were working with the original XIPAR package.   In the long run it is just easier to have two separate servers that can communicate with each other.    The inband DTMF settings should help to get those commands through to the vmail though.

Mars - N0PCO ALERTradio ERC www.alertradio.net | www.asteriskradio.net | www.darnsimple.net Technology resources for public safety.  It's all about being ready.

Remember reality sometimes bites, to prevent reality bites quit pulling its tale.

On 03/28/2012 06:23 AM, Anthony Percy wrote:

Hi all, no one commented on my message so i have resent it below just in case it was missed.... Any comments anyone???

Regards Anthony, VK2ACP

Hi all, I have setup voicemail on our Allstar repeater e.g i can call the voicemail by doing a *69999 with 9999 being the voicemail. I can hear the voicemail menu but none of my dtmf commands are accepted.. I thought that if i used the dtmf transmit comand it may work but it still does not work... Any ideas on how to pass dtmf to the voicemail?

Regards Anthony, VK2ACP _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users