AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978 -- Tim WD6AWP
This is a fantastic idea. Once this goes into effect, I’ll happily give up the two numbers that are not my original four digit one. :-) Buddy Brannan, KB5ELV - Erie, PA Email: buddy@brannan.name Mobile: (814) 431-0962
On May 16, 2019, at 12:46 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Is this backwards compatible with all othe versions of AllStar? Skyler On Thu, May 16, 2019 at 9:51 PM Buddy Brannan <buddy@brannan.name> wrote:
This is a fantastic idea. Once this goes into effect, I’ll happily give up the two numbers that are not my original four digit one. :-)
Buddy Brannan, KB5ELV - Erie, PA Email: buddy@brannan.name Mobile: (814) 431-0962
On May 16, 2019, at 12:46 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
This is a great idea. And, should work fine and be compatible with HamVoIP releases. 73, David KB4FXC On Fri, 17 May 2019, Skyler F wrote:
Is this backwards compatible with all othe versions of AllStar?
Skyler
On Thu, May 16, 2019 at 9:51 PM Buddy Brannan <buddy@brannan.name> wrote:
This is a fantastic idea. Once this goes into effect, Iâll happily give up the two numbers that are not my original four digit one. :-)
Buddy Brannan, KB5ELV - Erie, PA Email: buddy@brannan.name Mobile: (814) 431-0962
On May 16, 2019, at 12:46 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978
-- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
A good idea. Why not allow expanding 2 digits? I can see one callsign having more than 10, but very very few having more than 100 nodes. A little extra here might prevent having to do this again. ...STeve - KF5VH On 5/17/2019 9:24 AM, David McGough wrote:
This is a great idea.
And, should work fine and be compatible with HamVoIP releases.
73, David KB4FXC
On Fri, 17 May 2019, Skyler F wrote:
Is this backwards compatible with all othe versions of AllStar?
Skyler
On Thu, May 16, 2019 at 9:51 PM Buddy Brannan <buddy@brannan.name> wrote:
This is a fantastic idea. Once this goes into effect, I’ll happily give up the two numbers that are not my original four digit one. :-)
Buddy Brannan, KB5ELV - Erie, PA Email: buddy@brannan.name Mobile: (814) 431-0962
On May 16, 2019, at 12:46 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978 -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
great idea. tracks with what is current practice in other amateur interconnect nets. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On May 17, 2019, at 10:28, Steve Mahler <kizzy@lusfiber.net> wrote:
A good idea. Why not allow expanding 2 digits? I can see one callsign having more than 10, but very very few having more than 100 nodes. A little extra here might prevent having to do this again.
...STeve - KF5VH
On 5/17/2019 9:24 AM, David McGough wrote:
This is a great idea.
And, should work fine and be compatible with HamVoIP releases.
73, David KB4FXC
On Fri, 17 May 2019, Skyler F wrote:
Is this backwards compatible with all othe versions of AllStar?
Skyler
On Thu, May 16, 2019 at 9:51 PM Buddy Brannan <buddy@brannan.name> wrote:
This is a fantastic idea. Once this goes into effect, I’ll happily give up the two numbers that are not my original four digit one. :-)
Buddy Brannan, KB5ELV - Erie, PA Email: buddy@brannan.name Mobile: (814) 431-0962
On May 16, 2019, at 12:46 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978 -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to u
That idea is discussed here https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978/5?u=w... On Fri, May 17, 2019 at 7:27 AM Steve Mahler <kizzy@lusfiber.net> wrote:
A good idea. Why not allow expanding 2 digits? I can see one callsign having more than 10, but very very few having more than 100 nodes. A little extra here might prevent having to do this again.
...STeve - KF5VH
On 5/17/2019 9:24 AM, David McGough wrote:
This is a great idea.
And, should work fine and be compatible with HamVoIP releases.
73, David KB4FXC
On Fri, 17 May 2019, Skyler F wrote:
Is this backwards compatible with all othe versions of AllStar?
Skyler
On Thu, May 16, 2019 at 9:51 PM Buddy Brannan <buddy@brannan.name>
wrote:
This is a fantastic idea. Once this goes into effect, I’ll happily
give up
the two numbers that are not my original four digit one. :-)
Buddy Brannan, KB5ELV - Erie, PA Email: buddy@brannan.name Mobile: (814) 431-0962
On May 16, 2019, at 12:46 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
AllStarLink announcement: Node Number Extensions, NNX. Please checkout our proposal and request for comments at https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978 -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
On 5/18/19 12:44 AM, Tim Sawyer wrote:
On Fri, May 17, 2019 at 7:27 AM Steve Mahler <kizzy@lusfiber.net> wrote:
A good idea. Why not allow expanding 2 digits? I can see one callsign having more than 10, but very very few having more than 100 nodes. A little extra here might prevent having to do this again.
That idea is discussed here https://community.allstarlink.org/t/new-node-number-proposal-nnx/14978/5?u=w...
Fixed quoting (argh can people quote properly please) I think it's a good idea, this is one of the concerns I had, to make the extinction digit variable. Since node numbers are parsed left to right, there's no way to have a node 2000 and a node 20001, as 20001 would match on the 2000 when you "dial" it. For more info you can google how asterisk parses extensions, as it's really what a "node" is. This was one of the concerns we'd thought of when trying to write the spec is how people may use or abuse it. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
participants (7)
-
Bryan D. Boyle -
Bryan Fields -
Buddy Brannan -
David McGough -
Skyler F -
Steve Mahler -
Tim Sawyer