Two Node Server Lost CT
Good Morning! I have a two node ACID AllStar Server. Until today the telemetry and wait-times were common for both nodes. Today I change the lines for the first node to read, and lost the custom ct2 and ct8 tone ... telemetry=telemetry42316 wait_times=wait-times42316 I copied the common stanzas and added the node number to form (the second node handled in a like manner)... [telemetry42316] ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ;ct2=|t(660,880,150,2048) ;Orig Tone ct2=|t(2450,0,125,1024) ;Repeater Not Linked ;NASA Beep Tone ct3=|t(440,0,150,4096) ;Repeater Linked ;Low Tone ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ;ct8=|t(700,1100,150,2048) ;Orig Tone ; ct for LINKED UNKEY ct8=|t(262,330,150,2048)(784,330,150,2048) ;Harmony ; ct for LINKED UNKEY remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); remotemon=|t(1209,0,50,2048) cmdmode=|t(900,903,200,2048) functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times42316] telemwait=1750 ; Telemetry wait set to 1.75 seconds idwait=500 ; ID wait set to 0.5 seconds unkeywait=1000 ; Unkey wait set to 1.0 seconds calltermwait=1500 ; Call termination wait set to 1.5 seconds It feels like I have gone back to the default CT tones in app_rpt. Has anyone done this successfully? ...STeve - KF5VH
See Also (in rpt.conf for each node) unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 nolocallinkct=1 ...mike/kb8jnm
Good Morning! I have a two node ACID AllStar Server. Until today the telemetry and wait-times were common for both nodes. Today I change the lines for the first node to read, and lost the custom ct2 and ct8 tone ...
telemetry=telemetry42316 wait_times=wait-times42316
I copied the common stanzas and added the node number to form (the second node handled in a like manner)...
[telemetry42316] ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ;ct2=|t(660,880,150,2048) ;Orig Tone ct2=|t(2450,0,125,1024) ;Repeater Not Linked ;NASA Beep Tone ct3=|t(440,0,150,4096) ;Repeater Linked ;Low Tone ct4=|t(550,0,150,2048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ;ct8=|t(700,1100,150,2048) ;Orig Tone ; ct for LINKED UNKEY ct8=|t(262,330,150,2048)(784,330,150,2048) ;Harmony ; ct for LINKED UNKEY remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); remotemon=|t(1209,0,50,2048) cmdmode=|t(900,903,200,2048) functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times42316] telemwait=1750 ; Telemetry wait set to 1.75 seconds idwait=500 ; ID wait set to 0.5 seconds unkeywait=1000 ; Unkey wait set to 1.0 seconds calltermwait=1500 ; Call termination wait set to 1.5 seconds
It feels like I have gone back to the default CT tones in app_rpt. Has anyone done this successfully?
...STeve - KF5VH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (2)
-
mike＠midnighteng.com -
Steve Mahler