There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL
Wow!! I am very hooked.. I for one want to see how this all becomes available. I have not heard anything on the monitor but I am accessing it. I suspect maybe my firewall??? Do I need to open a UDP port through??? Doug KD8B From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Tuesday, May 24, 2011 1:35 PM To: app_rpt mailing list Subject: [App_rpt-users] progress on the VOTER project There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL
Now I am hearing and seeing!! Very cool! Doug KD8B From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Doug Bade Sent: Tuesday, May 24, 2011 3:54 PM To: 'app_rpt mailing list' Subject: Re: [App_rpt-users] progress on the VOTER project Wow!! I am very hooked.. I for one want to see how this all becomes available. I have not heard anything on the monitor but I am accessing it. I suspect maybe my firewall??? Do I need to open a UDP port through??? Doug KD8B From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Tuesday, May 24, 2011 1:35 PM To: app_rpt mailing list Subject: [App_rpt-users] progress on the VOTER project There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL
At 03:35 AM 5/25/2011, Jim Duuuude wrote:
There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html).
Excellent news Jim. This could be a very useful project. 73 de VK3JED / VK3IRL http://vkradio.com
Cool Jim, It is sounding "gurrgly" on my browser, almost an echo... Pete From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Tuesday, May 24, 2011 10:35 AM To: app_rpt mailing list Subject: [App_rpt-users] progress on the VOTER project There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL
So far, you are the only report of a problem, with the exception of someone who couldn't get it to work under Linux whatsoever. Given that neither JAVA nor the whole browser interaction paradigm was even envisioned to do what I am attempting to do with it (that is have code run that is in sync with the audio that is actually playing in real time), I'm rather surprised that it works at all. If there are others having a similar issue, hopefully something can be figured out related to what the users with problems have in common. Otherwise, I'm not sure what to even suggest at this point. I am *NOT* a JAVA, browser, or GUI dude. I can not even say that I am qualified to program my way out of a paper bag in these areas. I'm not a bad guesser, but that is about all I'm good for in these matters. Hopefully, someone with more of a clue in these areas might be able to lend a hand at some point. JIM WB6NIL Subject: RE: [App_rpt-users] progress on the VOTER project Date: Wed, 25 May 2011 04:24:25 +0000 From: pete.elke@esquared.com To: telesistant@hotmail.com; app_rpt-users@ohnosec.org Cool Jim, It is sounding “gurrgly” on my browser, almost an echo… Pete From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Tuesday, May 24, 2011 10:35 AM To: app_rpt mailing list Subject: [App_rpt-users] progress on the VOTER project There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL
I am sure it's on my end, you would have stopped the test if sounded like this all the time... Keep up the fine work! 73's From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Tuesday, May 24, 2011 9:48 PM To: Peter Elke; app_rpt mailing list Subject: RE: [App_rpt-users] progress on the VOTER project So far, you are the only report of a problem, with the exception of someone who couldn't get it to work under Linux whatsoever. Given that neither JAVA nor the whole browser interaction paradigm was even envisioned to do what I am attempting to do with it (that is have code run that is in sync with the audio that is actually playing in real time), I'm rather surprised that it works at all. If there are others having a similar issue, hopefully something can be figured out related to what the users with problems have in common. Otherwise, I'm not sure what to even suggest at this point. I am *NOT* a JAVA, browser, or GUI dude. I can not even say that I am qualified to program my way out of a paper bag in these areas. I'm not a bad guesser, but that is about all I'm good for in these matters. Hopefully, someone with more of a clue in these areas might be able to lend a hand at some point. JIM WB6NIL ________________________________ Subject: RE: [App_rpt-users] progress on the VOTER project Date: Wed, 25 May 2011 04:24:25 +0000 From: pete.elke@esquared.com To: telesistant@hotmail.com; app_rpt-users@ohnosec.org Cool Jim, It is sounding "gurrgly" on my browser, almost an echo... Pete From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Tuesday, May 24, 2011 10:35 AM To: app_rpt mailing list Subject: [App_rpt-users] progress on the VOTER project There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL
I had an issue yesterday at work with garbled audio. But at work our "sandboxes" are memory constrained (512mb) and disk constrained (8gb and I have only sometimes 100mb free). Our sandboxes are in a VM. So I am assuming that is the problem. When I came home and loaded it up on my laptop it worked fine. 73 leon On 5/25/2011 1:13 AM, Peter Elke wrote:
I am sure it's on my end, you would have stopped the test if sounded like this all the time...
Keep up the fine work!
73's
*From:*Jim Duuuude [mailto:telesistant@hotmail.com] *Sent:* Tuesday, May 24, 2011 9:48 PM *To:* Peter Elke; app_rpt mailing list *Subject:* RE: [App_rpt-users] progress on the VOTER project
So far, you are the only report of a problem, with the exception of someone who couldn't get it to work under Linux whatsoever.
Given that neither JAVA nor the whole browser interaction paradigm was even envisioned to do what I am attempting to do with it (that is have code run that is in sync with the audio that is actually playing in real time), I'm rather surprised that it works at all.
If there are others having a similar issue, hopefully something can be figured out related to what the users with problems have in common. Otherwise, I'm not sure what to even suggest at this point.
I am *NOT* a JAVA, browser, or GUI dude. I can not even say that I am qualified to program my way out of a paper bag in these areas. I'm not a bad guesser, but that is about all I'm good for in these matters. Hopefully, someone with more of a clue in these areas might be able to lend a hand at some point.
JIM WB6NIL
------------------------------------------------------------------------
Subject: RE: [App_rpt-users] progress on the VOTER project Date: Wed, 25 May 2011 04:24:25 +0000 From: pete.elke@esquared.com To: telesistant@hotmail.com; app_rpt-users@ohnosec.org
Cool Jim,
It is sounding "gurrgly" on my browser, almost an echo...
Pete
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Jim Duuuude *Sent:* Tuesday, May 24, 2011 10:35 AM *To:* app_rpt mailing list *Subject:* [App_rpt-users] progress on the VOTER project
There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html).
The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL:
https://allstarlink.org/votermon
This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel.
It's great to watch the signal strengths change as various mobile and portable stations move around.
The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely.
The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-)
User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts).
Check it out. Its definitely worth seeing.
JIM WB6NIL
was gurgly here at office on a win7 box, have not tried it at home yet will later today. -- Thanks in Advance Bob Brown, WØNQX Kansas City Metro Area http://sm0kenet.net http://byrg.net http://kcdstar.byrg.net Quis custodiet ipsos custodes? Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK -- On Wed, May 25, 2011 at 04:38, Leon Zetekoff <wa4zlw@backwoodswireless.net>wrote:
I had an issue yesterday at work with garbled audio. But at work our "sandboxes" are memory constrained (512mb) and disk constrained (8gb and I have only sometimes 100mb free). Our sandboxes are in a VM. So I am assuming that is the problem. When I came home and loaded it up on my laptop it worked fine.
73 leon
On 5/25/2011 1:13 AM, Peter Elke wrote:
I am sure it’s on my end, you would have stopped the test if sounded like this all the time…
Keep up the fine work!
73’s
*From:* Jim Duuuude [mailto:telesistant@hotmail.com<telesistant@hotmail.com>]
*Sent:* Tuesday, May 24, 2011 9:48 PM *To:* Peter Elke; app_rpt mailing list *Subject:* RE: [App_rpt-users] progress on the VOTER project
So far, you are the only report of a problem, with the exception of someone who couldn't get it to work under Linux whatsoever.
Given that neither JAVA nor the whole browser interaction paradigm was even envisioned to do what I am attempting to do with it (that is have code run that is in sync with the audio that is actually playing in real time), I'm rather surprised that it works at all.
If there are others having a similar issue, hopefully something can be figured out related to what the users with problems have in common. Otherwise, I'm not sure what to even suggest at this point.
I am *NOT* a JAVA, browser, or GUI dude. I can not even say that I am qualified to program my way out of a paper bag in these areas. I'm not a bad guesser, but that is about all I'm good for in these matters. Hopefully, someone with more of a clue in these areas might be able to lend a hand at some point.
JIM WB6NIL
------------------------------
Subject: RE: [App_rpt-users] progress on the VOTER project Date: Wed, 25 May 2011 04:24:25 +0000 From: pete.elke@esquared.com To: telesistant@hotmail.com; app_rpt-users@ohnosec.org
Cool Jim,
It is sounding “gurrgly” on my browser, almost an echo…
Pete
*From:* app_rpt-users-bounces@ohnosec.org [ mailto:app_rpt-users-bounces@ohnosec.org<app_rpt-users-bounces@ohnosec.org>] *On Behalf Of *Jim Duuuude *Sent:* Tuesday, May 24, 2011 10:35 AM *To:* app_rpt mailing list *Subject:* [App_rpt-users] progress on the VOTER project
There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html).
The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL:
https://allstarlink.org/votermon
This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel.
It's great to watch the signal strengths change as various mobile and portable stations move around.
The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely.
The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-)
User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts).
Check it out. Its definitely worth seeing.
JIM WB6NIL
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Maybe an AV packet inspection issue?? From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bob Brown - WØNQX Sent: Wednesday, May 25, 2011 9:17 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] progress on the VOTER project was gurgly here at office on a win7 box, have not tried it at home yet will later today. -- Thanks in Advance Bob Brown, WØNQX Kansas City Metro Area http://sm0kenet.net <http://sm0kenet.net/> http://byrg.net <http://byrg.net/> http://kcdstar.byrg.net <http://kcdstar.byrg.net/> Quis custodiet ipsos custodes? Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK -- On Wed, May 25, 2011 at 04:38, Leon Zetekoff <wa4zlw@backwoodswireless.net> wrote: I had an issue yesterday at work with garbled audio. But at work our "sandboxes" are memory constrained (512mb) and disk constrained (8gb and I have only sometimes 100mb free). Our sandboxes are in a VM. So I am assuming that is the problem. When I came home and loaded it up on my laptop it worked fine. 73 leon On 5/25/2011 1:13 AM, Peter Elke wrote: I am sure its on my end, you would have stopped the test if sounded like this all the time Keep up the fine work! 73s From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Tuesday, May 24, 2011 9:48 PM To: Peter Elke; app_rpt mailing list Subject: RE: [App_rpt-users] progress on the VOTER project So far, you are the only report of a problem, with the exception of someone who couldn't get it to work under Linux whatsoever. Given that neither JAVA nor the whole browser interaction paradigm was even envisioned to do what I am attempting to do with it (that is have code run that is in sync with the audio that is actually playing in real time), I'm rather surprised that it works at all. If there are others having a similar issue, hopefully something can be figured out related to what the users with problems have in common. Otherwise, I'm not sure what to even suggest at this point. I am *NOT* a JAVA, browser, or GUI dude. I can not even say that I am qualified to program my way out of a paper bag in these areas. I'm not a bad guesser, but that is about all I'm good for in these matters. Hopefully, someone with more of a clue in these areas might be able to lend a hand at some point. JIM WB6NIL _____ Subject: RE: [App_rpt-users] progress on the VOTER project Date: Wed, 25 May 2011 04:24:25 +0000 From: pete.elke@esquared.com To: telesistant@hotmail.com; app_rpt-users@ohnosec.org Cool Jim, It is sounding gurrgly on my browser, almost an echo Pete From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim Duuuude Sent: Tuesday, May 24, 2011 10:35 AM To: app_rpt mailing list Subject: [App_rpt-users] progress on the VOTER project There has been much progress made on the VOIP VOTER project (https://allstarlink.org/voter.html). The test/demo system is now in place in Madera County, CA and can be watched/listened to by going to the following URL: https://allstarlink.org/votermon This page includes a JAVA applet that, in real-time, shows the signal strengths of all the receivers in the system, along with which one is selected by the voting logic, and also plays the audio from the selected channel. It's great to watch the signal strengths change as various mobile and portable stations move around. The technology, as a whole is mostly fully implemented. with a few final issues to still address. Even in its present condition, you will see that it performs quite nicely. The biggest thing missing currently is documentation (gosh, it's just my FAVORITE thing to do... not!), and will be addressed shortly. I swear... it really will. :-) User-constructable boards will be available soon in somewhat reasonable quantity (blank boards will be available for $25 each). In addition, there is progress being made towards a commercially-available version of the board design pre-built and tested (with surface- mount parts). Check it out. Its definitely worth seeing. JIM WB6NIL _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (6)
-
Bob Brown - WØNQX -
Doug Bade -
Jim Duuuude -
Leon Zetekoff -
Peter Elke -
Tony Langdon, VK3JED