Virtuozzo is the same as a VM (in purpose) but it doesn't work the same way as VMWare. Virtuozzo natively installs the current version of Centos as an "OS Package" when one creates a "container." This is why I asked about a RPM or other means of installing core packages of Asterisks. Virtuozzo is an integrated environment with the ability to "bounce" a "container" to another "hardware node" in the event of a hardware failure, such as a failing RAID. It has an integrated ability to do a scheduled backup do a dedicated back-up server(s). Resources may be allocated at the hardware node level or from a master control panel known as HSP. My network sits behind a very capable hardware firewall with 100Mbps available at any time. I have a substantial investment in Virtuozzo. I have a dual processor dedicated server with RAID sitting next to me capable of running Asterisks on its own but on its own it doesn't have the ability to use a very strong feature set of Virtuozzo. Virtualization is easy; integrated and managed virtualization is a different story. -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Sunday, January 12, 2014 6:49 AM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 59, Issue 20 Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: Incoming connects (Lu Vencl) 2. Re: PATA SSD drives (Keith Goobie) 3. Clipping last 20mS of RX Audio? (Chris Hill) 4. Re: RPM's & Virtuozzo (Geoff) ---------------------------------------------------------------------- Message: 1 Date: Sun, 12 Jan 2014 07:48:19 -0500 From: Lu Vencl <vencl@att.net> To: Jim W7RY <w7ry@centurytel.net> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Incoming connects Message-ID: <FEDCB81D-2746-44CA-AC68-2085B3FFD4BF@att.net> Content-Type: text/plain; charset="utf-8" Hope you at least have employed a firewall such as via webmin. Hackers are likely to be targeting your box some day. Just saying from experience. Sent from my iPhone, Lu Vencl

On Jan 12, 2014, at 1:00 AM, Jim W7RY <w7ry@centurytel.net> wrote:

One of the very first things to do when testing connection issues is to put the node in the DMZ of the router. Easy, simple and can quickly eliminate lots of settings.

In fact, my node is on the DMZ with a strong password. Never had an issue.

73 Jim W7RY

...

On 1/11/2014 7:21 PM, Doug Crompton wrote: OK I think this is solved. Unfortunately it is hard to diagnose all problems when you have an inexperienced person at the other end.

It turns out the router was forwarding the right port BUT it was set to tcp instead of udp. I had gone over this several times with the operator and I had thought it was right but when we looked at it again it was wrong.

When set in the tcp mode it did accept connections but only for a short window of time after a prior disconnect from the other direction.

Thanks for all the input and sorry to cause all the back and forth on this. I learned that you have to be extremely concise when dealing with someone remotely who is inexperienced!

73 Doug WA3DSP http://www.crompton.com/hamradio

Subject: Re: [App_rpt-users] Incoming connects From: tim.sawyer@mac.com Date: Fri, 10 Jan 2014 20:29:46 -0800 CC: app_rpt-users@ohnosec.org To: doug@crompton.com

Do a ?tcpdump port 4569? at the Linux command line and incite a connect from another node. You should see inbound packets.

I have seen ISP?s block port 4569 but not FiOS. I?m on FiOS with an actiontek router and it works fine. -- Tim :wq

On Jan 10, 2014, at 7:41 PM, Doug Crompton <doug@crompton.com> wrote:

I am remotely trying to troubleshoot a friends new Allstar installation. I can ssh in and connect out to nodes but I cannot connect in to the system from external nodes. Port 4569 is forwarded.

I discovered this link -

http://www.voip-info.org/wiki/view/IAX

about consistent NAT and I was wondering if that might be the problem.

I was able to connect in one time right after a reboot which might support the NAT issue.

The router is an Actiontek MI424WR GigE as supplied by Verizon on their FIOS system.

Is anyone else having a problem with this router or have any ideas on this?

Nothing is logged at the server or shows up in the client on the system which kind of points to a routing failure.

Is there a good way to check for open port 4569 as I don't think normal port scan programs will check this.

73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users