Is the Port Fwd set up on the router? On Wed, May 23, 2012 at 1:22 PM, <app_rpt-users-request@ohnosec.org> wrote:

Send App_rpt-users mailing list submissions to        app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to        app_rpt-users-request@ohnosec.org

You can reach the person managing the list at        app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."

Today's Topics:

  1. Re: EchoLink (Alan Adamson)

----------------------------------------------------------------------

Message: 1 Date: Wed, 23 May 2012 14:22:00 -0400 From: Alan Adamson <adamson_alan@hotmail.com> To: <App_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] EchoLink Message-ID: <SNT108-DS24FA88593B3FF16DB7AE80E9030@phx.gbl> Content-Type: text/plain; charset="utf-8"

Doesn't get much easier than this? straight from the samples config file with the information changed as required.

[el0] confmode=no call=W7QO-R            ; Change this! pwd=<changed to my password>               ; Change this! name=Test ; Change this to your real name! qth=Atlanta,GA ; Change this to your actual QTH! email=adamson_alan@hotmail.com ; Change this! maxstns=20 rtcptimeout=10 node=710254 ; Change this! recfile=/tmp/recorded.gsm astnode=28578 ; Change this to your active Allstar node number! context=radio-secure server1=server1.echolink.org server2=server2.echolink.org server3=server3.echolink.org

With that setup I get these errors which have been discussed before? and it doesn't matter if I change the server names to naeast.echolink.org, etc.

[May 23 14:19:52] ERROR[2033] chan_echolink.c: Error in parsing header on server1.echolink.org [May 23 14:20:22] ERROR[2031] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [May 23 14:20:22] ERROR[2033] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [May 23 14:20:43] ERROR[2033] chan_echolink.c: Unable to connect to directory server server2.echolink.org [May 23 14:20:43] ERROR[2033] chan_echolink.c: Error in parsing header on server3.echolink.org [May 23 14:21:03] ERROR[2033] chan_echolink.c: Error in parsing header on server1.echolink.org

I'll go look to see if there have been changes to the chan_echolink.c file that I'm not running but I just built everything with the distribution makefile yesterday.  This was talked about on this forum last year, but I never found a resolution other than it worked for some and not for others????

Alan

From: Ken [mailto:ke2n@cs.com] Sent: Wednesday, May 23, 2012 1:23 PM To: adamson_alan@hotmail.com Subject: Re: [App_rpt-users] EchoLink

It is not unusual for one of the echolink servers to be down;  as long as you can talk to *one* of them, it should work. I think that, after you come on line, it may be some time before you can actually USE the echolink feature, while you wait for their system to updpate. Incorrect header information is another story - if you post your configuration (minus the password) maybe someone will see a problem - or not - in which case there was some compile issue ...

Ken -----Original Message----- From: Alan Adamson <adamson_alan@hotmail.com> To: App_rpt-users <App_rpt-users@ohnosec.org> Sent: Wed, May 23, 2012 8:34 am Subject: [App_rpt-users] EchoLink So, learning to run before I can walk :)?  With my newfound enthusiasm and a debian install.  I wanted to test out functionality figured an easy way was to see about getting EchoLink working as well. So I added the echolink.conf file, made the changes for my specific EchoLink node and restarted.  However I get all these errors about not being able to connect to their servers, header information not being correct, etc. I did some scanning and found that others have experiences the same thing.  Anyone have this working on a recent install? Second, is there some type of *echo* conference bridge or *reflector* (Sorry for the use of the term, but it's appropriate)? I need some way to test audio without being live on the air, etc? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users