Hi did it for a few months I found that it was asking a lot of bandwith for nothing much. I will try to make my own server so that it will send the audio on demand, not all the time. --- Message initial --- De : "K&R Yoksh" <yokshs@gmail.com> Envoyé : 16 juin 2013 13:10 A : app_rpt-users@ohnosec.org Objet : [App_rpt-users] Outstream huh? Now we're talking! Ever tried this? Hi, Stick this in your rpt.conf... outstreamcmd=/bin/sh,-c,/usr/local/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/local/bin/ezstream -c /etc/ezstream.xml You will need lame and ezstream obviously... Chris KB2FAF On 06/15/2013 12:33 AM, Robert Garcia wrote:
All,
Has anyone come up with an elegant solution to snag a copy of the audio streams to and from a repeater in order to send it to Radio Reference without requiring an additional sound card and/or interface? On Jun 16, 2013 11:00 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: Audio Feed (Chris(KB2FAF)) 2. Re: Audio Feed (Robert Garcia) 3. EMI/RFI issue (Benjamin L. Naber) 4. Re: EMI/RFI issue (Jim Duuuude)
----------------------------------------------------------------------
Message: 1 Date: Sat, 15 Jun 2013 22:07:32 -0400 From: "Chris(KB2FAF)" <kb2faf@arrl.net> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Audio Feed Message-ID: <51BD1DE4.80601@arrl.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi,
Stick this in your rpt.conf...
outstreamcmd=/bin/sh,-c,/usr/local/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/local/bin/ezstream -c /etc/ezstream.xml
You will need lame and ezstream obviously...
Chris
KB2FAF
On 06/15/2013 12:33 AM, Robert Garcia wrote:
All,
Has anyone come up with an elegant solution to snag a copy of the audio streams to and from a repeater in order to send it to Radio Reference without requiring an additional sound card and/or interface?
I expect it is possible with Alsa, but honestly my brain turns to mush when reading through their documentation.
Robert N5QM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
------------------------------
Message: 2 Date: Sat, 15 Jun 2013 21:17:37 -0500 From: Robert Garcia <robert@n5qm.com> To: "Chris(KB2FAF)" <kb2faf@arrl.net> Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Audio Feed Message-ID: < CAMLJ17NJmeFN5THqdLDZV7-ZqTz3HQQexag9L4Eeno+yP9F1qQ@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1
Thanks guys!
Buddy and Chris both helped me out and it seems to be working fine. Now to work though the learning curve...
Robert N5QM
On Sat, Jun 15, 2013 at 9:07 PM, Chris(KB2FAF) <kb2faf@arrl.net> wrote:
Hi,
Stick this in your rpt.conf...
outstreamcmd=/bin/sh,-c,/usr/local/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - | /usr/local/bin/ezstream -c /etc/ezstream.xml
You will need lame and ezstream obviously...
Chris
KB2FAF
On 06/15/2013 12:33 AM, Robert Garcia wrote:
All,
Has anyone come up with an elegant solution to snag a copy of the audio streams to and from a repeater in order to send it to Radio Reference without requiring an additional sound card and/or interface?
I expect it is possible with Alsa, but honestly my brain turns to mush when reading through their documentation.
Robert N5QM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
------------------------------
Message: 3 Date: Sat, 15 Jun 2013 23:58:39 -0400 From: "Benjamin L. Naber" <Benjamin@kb9lfz.com> To: app_rpt-users@ohnosec.org, Repeater-Builder <Repeater-Builder@yahoogroups.com>, radiomodifications@yahoogroups.com Subject: [App_rpt-users] EMI/RFI issue Message-ID: <1371355119.1896.4772.camel@benjamin-hp> Content-Type: text/plain; charset="UTF-8"
Greetings All,
While thinking of a way I can turn my node into a portable allstar node, it has been discovered the computer I'm using, generates RFI/EMI over the DC power connection.
The setup is as follows presently, which has zero *known* EMI/RFI issues. The radio is powered with an older linear 3A regulated power supply, which a parallel connection to a 12V 18Ah battery. All leads are kept short, under two feet. The radio is kept on 5W.
The computer has a 12Vdc connection, and it's presently using an ac/dc SMPS, one that can be bought on eBay for about $10.
Both of these are plugged into the same outlet strip, and as stated, zero discovered EMI/RFI issues.
The radio audio connections to the computer have the center conductors isolated with a 10nF cap.
Just as soon as I decide to power the computer from the battery, the radio has noise across every tunable frequency. Even if I disconnect the radio completely from the node, there is noise on the radio. From what is apparent to me, the noise is coming from the computers internal power supply section, riding the power wires back to the battery, and then to the radio.
I see there are plenty of EMI/RFI filters I can purchase. However, I'd like to maintain the Amateur Radio Spirit of creation for this case, so I'd like some pointers on what I should test for, and construct some EMI/RFI filters.
I have seen there are common mode and differential mode chokes filters, and some filters have both kinds of chokes. I'm not really sure the difference, besides the way the components are installed in the circuit.
If you find it better to talk in person, contact me via allstar or look for my phone number on the internet.
~Benjamin, KB9LFZ Allstar node 28569
------------------------------
Message: 4 Date: Sat, 15 Jun 2013 21:46:59 -0700 From: Jim Duuuude <telesistant@hotmail.com> To: "Benjamin L. Naber" <benjamin@kb9lfz.com>, app_rpt mailing list <app_rpt-users@ohnosec.org>, Repeater-Builder <repeater-builder@yahoogroups.com>, "radiomodifications@yahoogroups.com" <radiomodifications@yahoogroups.com> Subject: Re: [App_rpt-users] EMI/RFI issue Message-ID: <BLU155-W24CC41CF3DA43C51A22878B1820@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Perhaps a:
RadioShack? Snap-Together Ferrite Choke Core (273-105) might do the trick, or maybe a:
Snap Choke Core (273-069)
or something similar.
Jim WB6NIL
From: Benjamin@kb9lfz.com To: app_rpt-users@ohnosec.org; Repeater-Builder@yahoogroups.com; radiomodifications@yahoogroups.com Date: Sat, 15 Jun 2013 23:58:39 -0400 Subject: [App_rpt-users] EMI/RFI issue
Greetings All,
While thinking of a way I can turn my node into a portable allstar node, it has been discovered the computer I'm using, generates RFI/EMI over the DC power connection.
The setup is as follows presently, which has zero *known* EMI/RFI issues. The radio is powered with an older linear 3A regulated power supply, which a parallel connection to a 12V 18Ah battery. All leads are kept short, under two feet. The radio is kept on 5W.
The computer has a 12Vdc connection, and it's presently using an ac/dc SMPS, one that can be bought on eBay for about $10.
Both of these are plugged into the same outlet strip, and as stated, zero discovered EMI/RFI issues.
The radio audio connections to the computer have the center conductors isolated with a 10nF cap.
Just as soon as I decide to power the computer from the battery, the radio has noise across every tunable frequency. Even if I disconnect the radio completely from the node, there is noise on the radio. From what is apparent to me, the noise is coming from the computers internal power supply section, riding the power wires back to the battery, and then to the radio.
I see there are plenty of EMI/RFI filters I can purchase. However, I'd like to maintain the Amateur Radio Spirit of creation for this case, so I'd like some pointers on what I should test for, and construct some EMI/RFI filters.
I have seen there are common mode and differential mode chokes filters, and some filters have both kinds of chokes. I'm not really sure the difference, besides the way the components are installed in the circuit.
If you find it better to talk in person, contact me via allstar or look for my phone number on the internet.
~Benjamin, KB9LFZ Allstar node 28569
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (1)
-
pete M