That is because you need to put radio active nodenumber.. For example if I was node 2339 I would put radio active 2339. I hope this helps!!! Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Rick Sent: Friday, January 25, 2013 7:47 PM To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] No interface found Hi, I have installed the Acid Centos ISO on a Bosanova thin client with a Via chipset. The USB fob is a modded StarTech with the cm108 chip on it. I have tried to reinstall it a couple times and dowloaded the config. from AllStar site with my node #. When I open the Asririsk CLI and use the Radio active interface command or radio active usb , I get the "no interface found" or no USB found. Could this be caused by a incompatibility with the Via chipset or have I missed a step in the setup. Any comment would be greatly appreciated. Thanks, Rick W4KDM -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=317711FA3.A87F5>